I'm looking to replace some caps in a couple of "delayed/flickering turn-on" 216BW's, and I'd like to make sure I'm ordering the right parts.
So far, this is my Mouser parts list:
2.2uF 50v -- EEU-EB1H2R2S, 5x11mm
22uF 50v -- EEU-FR1H220, 5x11.5mm
47uF 63v -- EEU-FR1J470, 6.3x11.2mm
330uF 25v -- EEU-FR1E331, 8x11.5mm
820uf 25v -- EEU-FR1E821 (X5), 10x20mm
The 2.2 wasn't available in the FR series, but the EB series is long-life (5000 to 10000 h). From what I've read, the smaller caps might not need replacing, but I'm doing it anyways since I'll have the monitors apart anyways and it's only a handful of change more.
And yes, there are other threads on the 216BW, but being new, I'm not sure which is considered worse here -- starting a redundant thread or necro-posting/hijacking.
So far, this is my Mouser parts list:
2.2uF 50v -- EEU-EB1H2R2S, 5x11mm
22uF 50v -- EEU-FR1H220, 5x11.5mm
47uF 63v -- EEU-FR1J470, 6.3x11.2mm
330uF 25v -- EEU-FR1E331, 8x11.5mm
820uf 25v -- EEU-FR1E821 (X5), 10x20mm
The 2.2 wasn't available in the FR series, but the EB series is long-life (5000 to 10000 h). From what I've read, the smaller caps might not need replacing, but I'm doing it anyways since I'll have the monitors apart anyways and it's only a handful of change more.
And yes, there are other threads on the 216BW, but being new, I'm not sure which is considered worse here -- starting a redundant thread or necro-posting/hijacking.
Comment