Have voltages at the following pins on PU6 (BQ24707A), page 31, with battery and charger connected:
1-19
2-19
6-2.6
8-3.3
9-3.3
16-6
17-5.8
18-2.6
19-2.6
20-18.6
Have nothing at ACOK, pin 5, figure that's a problem. Using known good battery and original good Acer adapter.
Have 3.3v at pin 3 of PQ50, nothing at other pins of chip. Also have 3v on each side of PR117.
Are pins 2 and 6 of PQ50 being pulled to ground by pins 1 and 4?
1-19
2-19
6-2.6
8-3.3
9-3.3
16-6
17-5.8
18-2.6
19-2.6
20-18.6
Have nothing at ACOK, pin 5, figure that's a problem. Using known good battery and original good Acer adapter.
Have 3.3v at pin 3 of PQ50, nothing at other pins of chip. Also have 3v on each side of PR117.
Are pins 2 and 6 of PQ50 being pulled to ground by pins 1 and 4?
Comment