Possibly one of my happier moments as professional repair man, is by getting this differential probe PINTEK DP-50 even as used, which is capable to handle RMS voltage of Mains (x100), and up to three phase system (x200).
Plus for electronics up to 1.1KV RMS (x500) & 2.3KV RMS at (x1000).
For electrical measurements I am good to go with test leads that I own all ready, as for example professional HV large alligator clips.
What I am expecting as suggestions is any recommendation of specialized HV test probes, which helps more in measurements in electronics.
In the positive side of things, I would say that my GW Instek GDS-2102A oscilloscope inputs, are now safe.
Probes Isolation issue is solved for good.
Plus for electronics up to 1.1KV RMS (x500) & 2.3KV RMS at (x1000).
For electrical measurements I am good to go with test leads that I own all ready, as for example professional HV large alligator clips.
What I am expecting as suggestions is any recommendation of specialized HV test probes, which helps more in measurements in electronics.
In the positive side of things, I would say that my GW Instek GDS-2102A oscilloscope inputs, are now safe.
Probes Isolation issue is solved for good.
Comment