Re: Samsung FP-T5084 - Solved one problem, now have another (Clicking, Blinking LED)
I think I have the same issue as the OP.
Samsung FP-T5084 no video or audio with clicking sound when connected to AC. The clicking sound cycles about 3x then silence. I also noticed that the front power LED indicator is red and blinks on for 5 sec then off for 2 then repeats that cycle.
I checked the fuses on the PS and all of the 3 fuses are intact and not blown nor do I see any bad capacitors just from checking visually.
I removed the cable from the Y-main board to the PS to isolate. Same issue. Similarly, did the same with the X-main board. Same problem.
I also replaced 4 x 2200uf 10v capacitors on the PS with 2200uf 25v capacitors with no change in the symptom.
Before I replace the PS, any other tests I need to do? I do not quite comprehend some of the instructions on the thread and I apologize for that.
Thanks to all.
I think I have the same issue as the OP.
Samsung FP-T5084 no video or audio with clicking sound when connected to AC. The clicking sound cycles about 3x then silence. I also noticed that the front power LED indicator is red and blinks on for 5 sec then off for 2 then repeats that cycle.
I checked the fuses on the PS and all of the 3 fuses are intact and not blown nor do I see any bad capacitors just from checking visually.
I removed the cable from the Y-main board to the PS to isolate. Same issue. Similarly, did the same with the X-main board. Same problem.
I also replaced 4 x 2200uf 10v capacitors on the PS with 2200uf 25v capacitors with no change in the symptom.
Before I replace the PS, any other tests I need to do? I do not quite comprehend some of the instructions on the thread and I apologize for that.
Thanks to all.
Comment