Re: Samsung 42 picture problem.
Just when I thought I was getting somewhere...
I just went into the service menu, hoping to further fix the picture from there (as read on the forum)
Suddenly the TV went off and now I have the clicking relay symptom.
If I disconnect the Y main board, the clicking stops.
Guppstah
Member
Last Activity: 04-21-2013, 03:07 AM
Joined: 02-11-2013
Location: Chelmsford
-
Last edited by Guppstah; 04-17-2013, 07:13 AM. -
Re: Samsung 42 picture problem.
Very green tinge to everything....Leave a comment:
-
Re: Samsung 42 picture problem.
Here is the latest picture I am getting, the same on all inputs.Leave a comment:
-
Re: Samsung 42 picture problem.
Ok I have swapped the x main board, this means both the x main and y main have now been changed.
What I have now is a watchable picture, but with very little colour or definition.
The black screen and lava lamp problems have now gone.
Picture attached.Leave a comment:
-
Re: Samsung 42 picture problem.
Sorry got hit by man-flu yesterday.
A change of thinking?Leave a comment:
-
Re: Samsung 42 picture problem.
The NTC is cold.Leave a comment:
-
Re: Samsung 42 picture problem.
Here is a photo of the screen, and picture, I will do as you have mentioned when I get home.
Thanks....Leave a comment:
-
Re: Samsung 42 picture problem.
Here is a photo, and yes I have a DMM...Leave a comment:
-
Re: Samsung 42 picture problem.
The model is PS42B430P2W
The sound is perfect, all the time.Leave a comment:
-
Samsung 42 picture problem.
Having been on here before I have replaced my Y main board, before this I had a black screen.
Now this is what I have:
Turn on the TV - screen is black
After around 15 minutes the screen gradually comes on, but at best it's barely visible, all one colour, a kind of grey/lilac colour.
Any ideas would be greatly appreciated.
Garry -
Re: Samsung FP-T5084 - Solved one problem, now have another (Clicking, Blinking LED)
Replace ymain and y buffer boards?Leave a comment:
-
Re: Samsung FP-T5084 - Solved one problem, now have another (Clicking, Blinking LED)
New x main stopped the clicking and allowed the TV to turn on, but unfortunately still no picture. What's next to look at please?Leave a comment:
-
Re: Samsung FP-T5084 - Solved one problem, now have another (Clicking, Blinking LED)
Ok I have two main connections to the X main board, if I have both connected I just get the the relay clicking, if I disconnect either (one to Y main & the other to PSU) the TV turns on and I get sound but no picture. Does that help at all?
All help appreciated as I am recently unemployed and now without a TV, all going well......notLeave a comment:
-
Re: Samsung FP-T5084 - Solved one problem, now have another (Clicking, Blinking LED)
I have sound, if that makes a difference.Leave a comment:
-
Re: Samsung FP-T5084 - Solved one problem, now have another (Clicking, Blinking LED)
All I get is tiny flickers, like stars all over the screen.Leave a comment:
-
Re: Samsung FP-T5084 - Solved one problem, now have another (Clicking, Blinking LED)
Sorry to hijack, but this is my exact symptom.
If I turn the Samsung 42" TV on, I just get a clicking relay.
However if I disconnect the x main board, no clicking and the TV tries to turn on, startup sound and everything but a picture.
Does this mean the x main board is faulty?
Any help greatly appreciated.
Garry...Leave a comment:
No activity results to display
Leave a comment: