User Profile

Collapse

Profile Sidebar

Collapse
DavidChunco
DavidChunco
Last Activity: 09-01-2026, 10:55 AM
Joined: 03-06-2024
Location: Metepec
  •  
  • Time
  • Show
  • Source
Clear All
new posts

  • Just flashed your file with DMI data transferred from my original backup, but same behaviour, black screen and shuts down after 20-25 seconds ...
    See more | Go to post

    Leave a comment:


  • Sadly there is no serial number or information visible on the bottom cover, however I found that if I scan the QR code on a sticker near the touchpad, loads a support webpage with the following info:

    ideapad 3-15IIL05 Laptop - Type 81WE

    Serial number: PF315B10

    Model: 81WE01L7LM
    • Processor
      1x 10th Generation Intel® Core™ i5-1035G1 Processor (Core™ i5-1035G1)
    • Memory
      1x 4GB DDR4-2667
      1x 4GB DDR4 2667
    • Operating System
      Windows 10 Home Single Language 64 (SP: Spanish)
    • Storage
      1x 256GB PCIe NVMe
      1x 1TB 2.5”
    ...
    See more | Go to post

    Leave a comment:


  • Lenovo NM-D031 board, no video, shuts down after 25s despite stable power rails, need bios rebuild

    Hi, I have this machine on the work bench (Lenovo IdeaPad/NM-D031/GS454/GS554/GV450/GV550 board, no DGPU).

    I’m trying to diagnose a power-on issue and I would appreciate some guidance or a clean BIOS rebuild.
    • Board powers on correctly
    • All power rails remain stable
    • No video is ever produced
    • System always shuts down after ~20-25 seconds (very consistent timing) and requires full power cycle to restart.
    • BIOS was previously reflashed with a known-good image and cleaned ME region (when reflashing with clean ME region it power cycles several times but then shuts down and returns
    ...
    See more | Go to post

  • Thank you. With your BIOS flashed, the laptop successfully boots into Windows using the iGPU. However, when switching to the dGPU (RTX 4060) via the MUX switch, after restarting there is no display output. I am forced to reflash the BIOS each time to restore the image through the integrated graphics. Any thoughts? I’m also attaching what I believe is the original EC firmware from a 2MB Winbond chip. Could this be the issue?...
    See more | Go to post

    Leave a comment:


  • Thunderobot Zero 16 BIOS Request / Clean ME

    Hi, I have a Thunderobot Zero 16 Laptop. All voltages are fine but no video so I'm suspecting corrupted BIOS.

    I couldn't find bin anywhere for this model and manufacturer does not provide it.

    I'm attaching bios dump, I hope you can help me fix BIOS or clean ME to try. Chip is a Gigadevice 25R128ESIG and motherboard model is: DANLZMB4CA0 REV:A

    Laptop Specs:

    Thunderobot Zero 16

    16in 240 Hz
    CPU: i9 13900HX
    RAM: 32 GB DDR5
    GPU: RTX 4060
    SSD: 1 TB M.2 NVMe
    Motherboard model: NLZE DANLZMB4CA0 REV:A...
    See more | Go to post

  • Hi, I need flashing both chips on a Lenovo Yoga 7 14IRL8 motherboard

    Motherboard model: NB6380A_MB_V3

    S/N: YX06JT9D

    Computer doesn't display anything, 3V show briefly on bios chips, does several cycles then shuts down....
    See more | Go to post

    Leave a comment:


  • Dell G15 5515 Ryzen Edition Apparently Bricked BIOS Request

    Hi, I hope someone can help me with this, my Dell G15 Ryzen Edition does not post anymore (black screen, no Windows boot, no BIOS screen) after Windows Update pushed what appears to be a buggy bios image, I've tried the following with no success:

    - Receive help from Dell Support (it is out of warranty).
    - Disconnect machine from AC power and battery overnight.
    - BIOS recovery process
    - Connected external display via HDMI
    - Disassembled machine and found bios chip, its a Gigadevice 25LR128DSIG (GD25LR128DSIG), at first I tried to get it detected by CH341A (with...
    See more | Go to post
No activity results to display
Show More
Working...