many thanks Mon2 <3
Junior†
((pro))ficient
Last Activity: 01-20-2024, 04:31 PM
Joined: 12-31-2020
Location: Aurora, Illinois
-
I understand I have to look for one if not I'll charge the customer but I do have a couple i'll try before then. I'll keep you updated.
many thanks Mon2 <3
-
[B]I2C_PWR_SDA[/B]: 1.78V
won't be able to have that macbook again until Saturday but when i connected the macbook with apple config open on the working macbook it did not recognize it at all
I forget the error message but I think it's the usbc cable but i'm almost certain that shouldn't matter (i used the usbc charging cable from the other macbook)
odds are I told the customer it could be T2 corruption but I won't know until saturday, many thanks mon2 <3[B]I2C_PWR_SDA[/B]: 1.78V
won't be able to have that macbook again until Saturday but whenLeave a comment:
-
Hey mon2
,
first things first,
I do not have a spare on hand, i'm going right now to pick up another macbook to test if it's in DFU mode.
cleaned the ports and the connector and it's the same behavior.
many thanks mon2
is there anything else I should check?...Leave a comment:
-
Macbook Pro A1932 (820-01521-A) Stuck at 4.95V 30mA
[ATTACH=JSON]{"alt":"Click image for larger versionName:\tKE3SoAlmPA.jpgViews:\t16Size:\t754.7 KBID:\t3181280","data-align":"none","data-attachmentid":"3181280","data-size":"medium","title":"KE3SoAlmPA.jpg"}[/ATTACH]
I have a customer that mailed me his a1932 (820-01521-A), all i know is that it is completely dead.
here are my measurements/observations
with battery/fan connected (connected to 65W charger):
top USBC port: 4.950V (starts at ~75ma, then... -
Re: Apple Macbook Air A1465 2015 Board #: 820-00164-A
Everything is disconnected
It does remain on once it does manage to turn on, it is orange (as mentioned before the board is naked)
Putting everything back together and it chimes, with question mark folder!.
Although still intermittent.
And no problem will check back as well, thank you for your time mon2.
Looking into the thread it does seem like the LIO board is probably busted but I don't have another spare one unfortunately. Will revisit this if i manage to...Leave a comment:
-
Re: Apple Macbook Air A1465 2015 Board #: 820-00164-A
Lol always love seeing you around mon2
@ L7095, pin # 2 : 3.42V
@ PPBUS_G3H (fuse F7140, pin # 2): 8.6V
New thing is happening now that I cleaned the shrek juices (I timed it) : after 10-11 seconds it turns on with max fan spin *I did not do anything to SYS_ONEWIRE this time*).
Okay, trying to make it happen again, isn't happening.Leave a comment:
-
Re: Apple Macbook Air A1465 2015 Board #: 820-00164-A
As a side note I forgot to add this into the post, apologies, I also checked U8050:
PP3v3_S5 is present and is at 3.33V as expected,
SMC_SENSOR_PWR_EN is not present,
I checked SMC_BC_ACOK and it is also not present.
Any light is greatly appreciated. Will update if I find anything more notable.Leave a comment:
-
Apple Macbook Air A1465 2015 Board #: 820-00164-A
Hey all, (and most likely mon, *love ya*)
Boardview/Schematic found [URL="https://www.badcaps.net/forum/showthread.php?t=66865&highlight=A1465"]here[/URL]
NOTE: this board does have evidence of liquid damage and it's mostly concentrated where i've circled on the boardview and shown in the images attached. I hope they may serve intuition.
Hope you're having a lovely Wednesday evening, I have this macbook air that as soon as I plug in the charger it will either flash green for a split second, turn off, then flashes red the next, then nothing.... -
Re: Tips on how to remove a very stuck memory chip on a GPU?
If at all possible using low melt solder and I just bought this one (haven't used yet) but northridgefix uses this hot air station: [url]https://northridgefix.com/product/atten-st-862d-hot-air-station-with-4-nozzles/[/url]Re: Tips on how to remove a very stu...nozzles/[/url]Leave a comment:
-
Schematic Request/Boardview for X1 Carbon 7th Gen (Type 20QD) , 01YU350
Part number: 451190F0111X
I have here this carbon that I love dearly, I thought it was worth a shot for requesting a schematic as I think I can learn a great deal from just having my grubby hands on it. Thanks in advance, will update if I happen to find one (I saw another thread with the same name but I don't think he was giving the correct information)
-
Re: (Locked) BIOS LOCKED HP ELITEBOOK 8470P
[url]https://www.badcaps.net/forum/attachment.php?attachmentid=74645&d=1384867477[/url]
if you have a bios chip programmer, if you don't: [url]https://www.badcaps.net/forum/showthread.php?t=103184&highlight=HP+ELITEBOOK+8470P+bios[/url]Re: (Locked) BIOS LOCKED HP ELITEBOO...light=HP+ELITELeave a comment:
-
Re: New Members - please post your introductions here
Sorry meant to add that I'm originally from Illinois, and now I am in Florida
...
Last edited by SMDFlea; 04-17-2022, 01:04 PM.Leave a comment:
-
Re: New Members - please post your introductions here
Hello everyone!
My government name is Juan but I prefer Junior,
I'm more of a programmer (Number Cruncher as TopCat puts it LOL)
, I got into programming in the summer before I got into the 11th grade in HS thanks to a great friend of ours kpjVideo here on the forum I believe. Although I'm still debating what my grandiose capstone/ next project should be so that I may have a proper challenge, probably something to do with CNN or some type of program to make someone's life easier (and me some...
Leave a comment:
No activity results to display
Leave a comment: