Re: Dead Vestel 17IPS71 power board

Hi guys, thanks a lot for all the descriptions, it already helped a lot to understand the process and common falts. I have the same vestel board in a 'Telefunken' TV. The standby LED on the front is blinking. I tried all measuring than you described. On the CN4 output connector I read the 12 volt but I don't get the 5v standby voltage, any guesses what could be wrong? I also read 2.5v on pin7(the 4th pin in the upper row, starting from the pin that is marked as 1 on the board). I could't find a shorted diode, I still changed d22, d24 and d26 but...