Re: New Members - please post your introductions here
Hi,
Found this forum by google (what else could it be) by searching for "ESR measurement" and found it very helpful. More in the thread ..
Born in Belgium in 1949 and married with a Thai and now living in Bangkok (retired).
Master degree in electronics engineering KUL (Louvain) in 1973
First job in power electronics, starting with thyristors end ending with IGBT's
mainly developing / producing drives first for DC and later only AC
For hobby free radio / development of transmitters / exciters and later satellite
(member of www.sat4all.com forum) and of course electronic repairs (first take up the schematic and then repair) But now living in Bangkok, must start all over from zero. Satellite will be difficult because here in Happy Condo Ladphrao 101, a dish on the roof is not allowed ! And for repair must buy nearly everything new ..
First thing to buy was a 50 MHz digital oscilloscope (Rigol). Power supply 30V / 5A is ordered (Hongkong and still waiting ... because Chinese new year)
The only things I brougth from BE are my Weller soldering station and auxiliaries and my magnifying lamp (important at my age ;-)). My first repair now was a Zenith solid state short wave receiver from the years 70 for a friend here. Want to order also a frequency counter and a function generator
and maybe a spectrum analyser (I had one in BE from the American Airforce)
and some RF stuff. Because it is a hobby, I look for not too expensive ...
So, I think this is enough as introduction.
Greetings, Dany
Hi,
Found this forum by google (what else could it be) by searching for "ESR measurement" and found it very helpful. More in the thread ..
Born in Belgium in 1949 and married with a Thai and now living in Bangkok (retired).
Master degree in electronics engineering KUL (Louvain) in 1973
First job in power electronics, starting with thyristors end ending with IGBT's
mainly developing / producing drives first for DC and later only AC
For hobby free radio / development of transmitters / exciters and later satellite
(member of www.sat4all.com forum) and of course electronic repairs (first take up the schematic and then repair) But now living in Bangkok, must start all over from zero. Satellite will be difficult because here in Happy Condo Ladphrao 101, a dish on the roof is not allowed ! And for repair must buy nearly everything new ..
First thing to buy was a 50 MHz digital oscilloscope (Rigol). Power supply 30V / 5A is ordered (Hongkong and still waiting ... because Chinese new year)
The only things I brougth from BE are my Weller soldering station and auxiliaries and my magnifying lamp (important at my age ;-)). My first repair now was a Zenith solid state short wave receiver from the years 70 for a friend here. Want to order also a frequency counter and a function generator
and maybe a spectrum analyser (I had one in BE from the American Airforce)
and some RF stuff. Because it is a hobby, I look for not too expensive ...
So, I think this is enough as introduction.
Greetings, Dany
)
Comment