Samsung ue49mu6120

[crystalsound]

The TV model must also be indicated and the motherboard number! Some kind of dump you have is strange, or it’s poorly read or strangely damaged (this is the first time I’ve seen something like this), try this...

You're right it's ue49mu6120k, mainboard bn41-02568a bn94-12644a. May the problem be related to my programmer? I've been using it for 10 years so far and never had any problems with it.

[lotas]

Hi, mine is starting, staying some seconds with audio and backlight but no video, then off and reboots. Does this even with panel ribbons disconnected, so I assume it's a firmware issue. Can you fix this for me? I dumped mine and tried some files you posted but i get no standby at all. I flash it with tl866 and minipro, and i am able to set the register stuff, although with a different procedure. Thank you!

The TV model must also be indicated and the motherboard number! Some kind of dump you have is strange, or it’s poorly read or strangely damaged (this is the first time I’ve seen something like this), try this...

[crystalsound]

Hi, mine is starting, staying some seconds with audio and backlight but no video, then off and reboots. Does this even with panel ribbons disconnected, so I assume it's a firmware issue. Can you fix this for me? I dumped mine and tried some files you posted but i get no standby at all. I flash it with tl866 and minipro, and i am able to set the register stuff, although with a different procedure. Thank you!

[lotas]

Hi Lotas,
Could you help me with my bin file?

UE49MU6402U
BN41-02568A

Thanks, Szymon

Hi, but yours is working, it’s not the problem.

[Szymon095]

Hi Lotas,
Could you help me with my bin file?

UE49MU6402U
BN41-02568A

Thanks, Szymon

[Muflo58]

No,
i see some irregular signs on the glass, it is broken for sure.
I think it was already broken when they carried it to me.
Thanks for all.

[lotas]

Do you agree?

I don't see, I can't say anything, maybe the panel was damaged, you know better.
Maybe the thin cables that go to the glass were damaged, when removing the back cover.

[Muflo58]

Thank, it works now.
The TV power on but there are horizontal lines on display.
I'm afraid I broke the glass while opening it.
Do you agree?

[lotas]

Thank you,
but in my Asprogrammer, the bit QE is not enabled! (see attached)

You need to install the program "NeoProgrammer V2.2.0.10".

[Muflo58]

The version is 2.1.0.13

[Muflo58]

Thank you,
but in my Asprogrammer, the bit QE is not enabled! (see attached)

[lotas]

Hi,
i have same problem with:

UE49MU6120K
BN41-02568A

can i use same file?
in case of not, attached is my file

Try.

[Muflo58]

Hi,
i have same problem with:

UE49MU6120K
BN41-02568A

can i use same file?
in case of not, attached is my file

[lotas]

Many many thanks again!!! Works perfectly!!

It's good that it works!

[Jeffaas]

Many many thanks again!!! Works perfectly!!

[lotas]

hi Lotas, if you have any time. could u please check my dump? Kind regards!!!!

Hello, yes there is time, ready, try it.

[Jeffaas]

hi Lotas, if you have any time. could u please check my dump? Kind regards!!!!

[lotas]

working. Thank You

Ok! I had no doubt.

[Martin_CZ]

Try.

working. Thank You

[lotas]

please modily firmware. Samsung UE49MU6170. Many thanks. Martin

Try.