Re: Thorn 65thl4kst1
So if your meter was set to 20 volts DC and the red lead taking the reading and black on chassis then those readings are not good.
With the set powered up you said you have 12V dc on both sides of the Tcon fuse.
From your readings VCC18 should read 1.8V DC
There are several other test points I've circled in blue and they are the ones I can see. The legend is extremely small and hard to read from the image above.
So if your meter was set to 20 volts DC and the red lead taking the reading and black on chassis then those readings are not good.
With the set powered up you said you have 12V dc on both sides of the Tcon fuse.
From your readings VCC18 should read 1.8V DC
There are several other test points I've circled in blue and they are the ones I can see. The legend is extremely small and hard to read from the image above.
Comment