Hi all.
I have a Toshiba 47TL515U main board (PE0949A, V28A001247B1) that doesn't start.
The debug port is at location CN506. It is 115200 bps at 3.3V. PIN2 is TX and PIN3 is GND.
The current eeprom is corrupted, you can see error messages for bad blocks in the attached log file.
I'm unable to flash the firmware since the TV doesn't start. And I'm unable to find an eeprom dump.
Do you have an eeprom dump I can use? The same main board is found in the flollowing TV models:
32TL515U
42TL515U
47TL515U
55TL515U
Thanks.
I have a Toshiba 47TL515U main board (PE0949A, V28A001247B1) that doesn't start.
The debug port is at location CN506. It is 115200 bps at 3.3V. PIN2 is TX and PIN3 is GND.
The current eeprom is corrupted, you can see error messages for bad blocks in the attached log file.
I'm unable to flash the firmware since the TV doesn't start. And I'm unable to find an eeprom dump.
Do you have an eeprom dump I can use? The same main board is found in the flollowing TV models:
32TL515U
42TL515U
47TL515U
55TL515U
Thanks.
Comment