Haier LE24M600C Rebooting not passing logo

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tdiamarelo
    Member
    • Jan 2020
    • 38
    • Luxemburgo
    #1

    Haier LE24M600C Rebooting not passing logo

    Hello!
    Got an Haier LE34M600C that starts up just fine after pressing the power button, showing the Haier logo and then it stays like this for 10 to 15 seconds then shuts down and restarts doing this loop over and over.
    After reboot the only way to shut down the set is to remove power cord. The power off button is not working.

    Is the ROM corrupt like it happens in some Samsung?
    I attached some pictures from the Power supply / Motherboard (it is the same board)
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Verlengsnoer
      Bios splash/logo change
      by Verlengsnoer
      Hi all,

      at firs, i hope this is the right place to post my question.

      Im looking for a tool to change the bios logo.

      everyone knows when you turn on your laptop/pc you will see the manufacturer logo like lenovo, hp, dell...

      i know that HP has a build in option to change the splash logo.

      but i want to change the manufacturer logo to an own logo.

      I try'd Change Logo 5.0, but when i make a backup of an laptop and edit the logo and flash the editted version back on the laptop the logo diddnt change.
      ...
      10-28-2022, 09:52 AM
    • Gripen
      Lenovo M93P Tiny restarts after Lenovo logo
      by Gripen
      Hello. I have several Lenovo M93P tiny that have the same problem. When turned on, the Lenovo logo appears and then restarts. It reappears, restarts again and it goes round and round to infinity. I can't enter the bios either.

      I tried to replace both CPU and RAM but it didn't help.
      What could be the problem?
      06-04-2021, 01:53 PM
    • TR103
      Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
      by TR103
      Hi, I have a Samsung UE50TU with:
      - sound and backlight, but no picture
      - when it arrived, it had a picture for a few seconds
      - it keeps rebooting
      - without ribbon cable between the two panel boards, it does not reboot but I have no picture
      - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
      - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

      - without cable between mainboard and lcd panel and with a jumpered...
      01-22-2025, 04:12 PM
    • Prosatanosz
      Asus B85M-GAMER no hdmi output and random restarts
      by Prosatanosz
      Hi!

      Asus B85M-GAMER absolute no hdmi output (not at start, not at Windows), and random restarts. Everything work, except hdmi and random restarts after 0.1-3 min. Restarts even in bios. On VGA Windows boots up fast, games and apps starts ok. Mem, psu, cpu changed, no luck. I need shematic, because i think the restarts caused by the hdmi failure.
      10-19-2024, 05:27 AM
    • plytek
      Samsung QE50Q60TA rebooting
      by plytek
      Hi all.

      I'm trying to fix my Samsung QE50Q60TA TV.
      IT's rebooting every few seconds.
      I have done some tests and it looks like it stops rebooting when I tape pin 46 (I thinks it's FB_1) on the ribbon tape that connects two boards atteched to screen, but nothing is visible, just backlight is solid and I can hear sound. Taping over other pins doesn't work.
      Have also soldered two pins on the motherboard to check if I can get an image on the rights side of the tv, but it keeps rebooting.
      Can anyone suggest what I can test and do to get it working again please?...
      02-08-2025, 06:02 AM
    • Loading...
    • No more items.
    Working...