Long story short guys, I was getting crazy readings on backlights from LED driver. Opened the tv up and found almost 1 to 2 bad leds on each strip. Purchased brand new LEDs, replaced all backlights.
Still no luck. At this point I unplugged Main board connector from power supply assuming if I had a bad main board the LEDs would actually light up and no luck. Does this mean power supply needs to be replaced?
Still no luck. At this point I unplugged Main board connector from power supply assuming if I had a bad main board the LEDs would actually light up and no luck. Does this mean power supply needs to be replaced?
Comment