Samsung 64" plasma PN64E533D2FXZA

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ScottyMac
    New Member
    • Apr 2014
    • 3
    • USA

    #1

    Samsung 64" plasma PN64E533D2FXZA

    I just wanted to offer anyone needing any part for a Samsung 64" plasma TV PN64E533D2FXZA, I have everything except the screen and the remote. I was given the TV and hoped to repair it but it ended up being a bad screen which cost way to much for a replacement. So I removed all parts and boxed them up and put in storage. And trashed the bad screen.
    Every thing else I kept.
    So if anyone wants any of the parts, you are welcome to have them for free. Just take care of the shipping cost whatever it will cost. I don't need to make anything off of it and will box up the parts for you and give you the total weight so you can handle creating a shipping label. Then just email me the label and I'll attatch it to the box and will even drop it off at the local ups store.
    I just want to give back to the community for all the info shared here that allowed me to do many repairs successfully.
    Just pm me if you need something and I'll get it wrapped up for you. I will give parts in the order of who asked first to be fair.
    Scottmac
  • martino
    Not so "senior"
    • Aug 2013
    • 997
    • canada

    #2
    Re: Samsung 64" plasma PN64E533D2FXZA

    send you an inbox
    Proud owner of dozens of broken TV's and many,many,many boards.


    Our website and passion:http://hollenhundshepherds.com/

    Comment

    • bman4
      Badcaps Veteran
      • Jul 2015
      • 210
      • canada

      #3
      Re: Samsung 64" plasma PN64E533D2FXZA

      I got a BN96-16536A ,LJ92-01780A.
      Compatible models:
      PN59D550C1FXZA PN59D6500DFXZA PN59D7000FFXZA PN59D8000FFXZA


      removed from a freight damaged new fully functional TVs with cracked panels. Before taking apart, performed functional test for quality assurance

      Comment

      • martino
        Not so "senior"
        • Aug 2013
        • 997
        • canada

        #4
        Re: Samsung 64" plasma PN64E533D2FXZA

        Can't seem to get a hold of this gentle men Hope he's ok,was hoping to get the psu from this tv from him.
        Proud owner of dozens of broken TV's and many,many,many boards.


        Our website and passion:http://hollenhundshepherds.com/

        Comment

        • ScottyMac
          New Member
          • Apr 2014
          • 3
          • USA

          #5
          Re: Samsung 64" plasma PN64E533D2FXZA

          Martino, I sent you a private message.

          Sorry for the super long delay answering.

          Yes I still have all the boards for anyone who might need one. I do not have the remote, the bezel, the back cover or the monitor but I do have the stand and all the boards.

          Comment

          Related Topics

          Collapse

          • porfyriadhs
            Samsung Plasma PS51D6900DS Bootloop
            by porfyriadhs
            Hello . I have a problem with a samsung plasma tv stuck in bootloop . The TV is Samsung PS51D6900DS plasma smart tv .Need help if anyone have any suggestions
            Thanks a lot !!
            10-19-2023, 11:31 AM
          • An-klamm
            Samsung Plasma PS-42E92H
            by An-klamm
            Hi!
            I have repaired a few TVs but never had a plasma TV before.
            For a new challenge/experience I picked up a Samsung PS-42E92H from the junkyard.
            Unscrewed at home, the fault seemed clear. 3 capacitors on the PSU were bulging.
            I also replaced some surrounding ones and came up with 8 capacitors.
            Unfortunately, the TV still does not turn on.
            5V standby are measurable on the PSU and on the mainboard.
            If I understood correctly, 12V should be generated on the mainboard. But there comes nothing.

            On the right part of the mainboard I can't...
            07-15-2023, 03:40 AM
          • HarleyFool
            Troubleshooting Samsung PN60E550D1FXZA Plasma TV
            by HarleyFool
            I have a Samsung 60-inch plasma TV, model PN60E550D1FXZA with factory remote. When cold, the TV will turn on and operate normally. After operating for longer than 30-60 minutes, if the set is turned OFF and then back ON, it will turn back ON, but there is no picture (screen remains black). I can confirm set is ON because I can hear audio from the speakers when I operate the VOLUME UP/DOWN control on the remote. If I allow the TV to rest (cool), it will eventually turn back ON with picture restored. That may take an hour or overnight.

            I have removed the back of the TV and looked...
            12-21-2021, 02:40 PM
          • Kiwi Mike
            Samsung plasma PL51F4500 shocking!
            by Kiwi Mike
            Hi folks,

            I have a Samsung plasma tv PL51F4500. It works fine, image is good, but it shocks me a little when i touch it or touch a connect hdmi cable. So my concern is mostly for anything i connect to it, my notebook etc. Interestingly, i had stopped using it and went to turn it on yesterday and it basically doesn't 'shock' me anymore. The observation here is that its a lot better than when it was in regular use. It was pretty salty!

            This model has an integrated sustain board with the main power supply. I repaired it about 2 years ago (mosfets) but i may have missed...
            02-15-2023, 08:19 PM
          • thetonywarren
            Samsung PN51E450 Plasma Vertical Lines
            by thetonywarren
            Friend of mine has a Samsung Plasma panel with some vertical lines that are starting to form on the screen.....Ive never worked on a plasma panel, so Im not sure what to look for, would this typically be a main board issue, or something else?

            Any help would be appreciated.....Please let me know.......
            02-14-2022, 01:23 PM
          • Loading...
          • No more items.
          Working...