TNPA4844 42 inch to 54 inch convert possible?

[freakaftr8]

Hey all so I have two 54 inch Panasonic plasmas TC-P54S2 using this board. One has a 10 blink 1 has a 7 blink. Both are faulty SC boards. I don't know if this has been discussed before but these TV's have been used heavily every day in a bar run 24/7. Pretty nasty inside smells like cigarrette smoke anf a lot of dust.

I do not feel like replacing the 500 or so components that short out on these boards as I have not had really good luck with this style generation SC board in the past and they're a pain in the ass to remove components from.

My question is that I have found some relatively working inexpensive TNPA4844 boards from the 42 inch variant. With a couple changes where I've noticed capacitors and coils are in different spots, would these work in the 54 Inch?

[freakaftr8]

Re: TNPA4844 42 inch to 54 inch convert possible?

You would think a fuse would be nice in circuit to minimize damage... NO!

[tw2005]

Re: TNPA4844 42 inch to 54 inch convert possible?

Confused, S1 or S2

[tw2005]

Re: TNPA4844 42 inch to 54 inch convert possible?

If it's S1, then I'm thinking , cpacitors, coils, plus adding deficient IGBTs plus connectors at sd/su boards appear to be different