Replacement PFC resistors

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • matomato13
    Member
    • Sep 2016
    • 31
    • Canada
    #1

    Replacement PFC resistors

    I'm having a similar problem to this https://www.badcaps.net/forum/showth...highlight=J852 and I'm trying to buy replacement resistors on Digikey.

    From what I have gathered, I still have a choice of 18 resistors.

    Here's the search results https://www.digikey.ca/products/en/r...=0&pageSize=25

    Any help on which one to choose?
    Tags: None
    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa
      #2
      Re: Replacement PFC resistors

      You can use regular 1/4watt resistors to replace out of tolerance ones
      I assume no responsibility for any stupid suggestions I might post.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • TinkerTron
          Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
          by TinkerTron
          Hey everyone,

          I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

          Instead, here's what's been bugging me so far:
          The schematic...
          3 Photos
          03-06-2025, 02:03 PM
        • quickname
          Cyberpower 1500AVR UPS repair
          by quickname
          I'd like to start out by thanking this forum for providing the info to be able to repair my 15 year old CP1500AVRLCD UPS. Here is all the info I gathered during my trouble-shooting and re-capping.

          Like clockwork, I've had to replace the SLA batteries every 4 years. It was about that time and the UPS was acting like it needed new batteries... randomly shutting off with AC present, not being able to charge fully, and poor runtime when AC was removed. So, I replaced the batteries but noticed that it was not charging properly.

          I decided to verify that the batteries were...
          11-12-2023, 09:57 AM
        • lolich112
          How to find out what resistors i need as a replacement?
          by lolich112
          Hey,
          I have a Palit GTX 750 StormX with 2 gigs. on the backside right above the pcie connectors there are multiple conponents (See in the pics). I suppose those are resistors or capacitors. 2 of them broke of and now I need 2 replacements. I looked arround for some schematics but couldn´t find any. Someone have an idea how to identify those?
          Thanks in advance!...
          09-03-2023, 01:37 PM
        • reformatt
          Macbook Air M2 A2681 Kernel panics after screen replacement
          by reformatt
          Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

          It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
          07-31-2025, 08:37 PM
        • the_rem
          Unknown transformer : how to find a good replacement part ?
          by the_rem
          Hello guys,

          I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.

          I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow...
          VEF20FB07BW(2025001A)20110927.pdf
          https://drive.google.com
          04-23-2025, 01:48 AM
        • Loading...
        • No more items.
        Working...