Hello all,
Have two Funai tv model WF20L6 with the same problem. TV's turn on for just under 1 minute then go off . All standby voltages are present. For a moment after pwr on all voltages are okay before shut down. Did anyone encounter such problem.I am an experienced tech, I covered all possible obvious checks, except EEprom replacement, i did isolate CFFls and LVDS to the panel to no avail or results. "protect1 and protect2" voltages are not clear on the diagram
one is 3.3v and the other is "0" are they okay . Please let me know.
Have two Funai tv model WF20L6 with the same problem. TV's turn on for just under 1 minute then go off . All standby voltages are present. For a moment after pwr on all voltages are okay before shut down. Did anyone encounter such problem.I am an experienced tech, I covered all possible obvious checks, except EEprom replacement, i did isolate CFFls and LVDS to the panel to no avail or results. "protect1 and protect2" voltages are not clear on the diagram
one is 3.3v and the other is "0" are they okay . Please let me know.