Samsung PN60E7000FFXZA

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fjjarrett
    New Member
    • Nov 2017
    • 4
    • United States

    #1

    Samsung PN60E7000FFXZA

    Hey everyone,
    I have a Samsung PN60E7000FFXZA and having problems with it turning on and An off. I took the back off and pushed on the power supply board and it worked for a little. It now clicks on an off displaying shows and then it will stay on for a few minutes an go back off. It keeps doing it. I was thinking it was the main board but when i pushed the power supply l thought it could be that???
  • tvtimmy
    Badcaps Legend
    • Mar 2015
    • 1160
    • usa

    #2
    Re: Samsung PN60E7000FFXZA

    Pull the power supply out and re-solder everything with lead solder. Start there.

    Comment

    • Fjjarrett
      New Member
      • Nov 2017
      • 4
      • United States

      #3
      Re: Samsung PN60E7000FFXZA

      Will do thanks. Also the screen goes black for a sec and you can still hear the the sound.

      Comment

      Related Topics

      Collapse

      • Document Archive
        Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
        by Document Archive
        This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
        09-07-2024, 05:50 AM
      • sam_sam_sam
        Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
        by sam_sam_sam
        I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

        One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
        03-31-2024, 02:12 PM
      • Nicktronic
        Samsung Power Supply Board BN44-00874F
        by Nicktronic
        Hey everyone,

        This power supply board is hard to find but there are repair kits available. This board had a blown fuse, FP801S, blown PFC MOSFET, QP802CS and ceramic cap, CP809. I replaced them with parts I already had and tested the rest of the parts that would've come in the repair kit and they were fine. I powered the board up on the bench expecting, in typical Samsung power supply board fashion, to see all my output voltages but, nothing. 0 volts on CNL801, CNM801 and CNT801. The only thing I have is 170vdc on the filter caps. No standby voltage either.

        Anybody...
        03-17-2025, 06:20 AM
      • Document Archive
        Samsung Galaxy Book Ion NP950XCJ Notebook Specification for Upgrade or Repair
        by Document Archive
        This specification for the Samsung Galaxy Book Ion NP950XCJ Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the NP950XCJ boardview and NP950XCJ schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
        09-06-2024, 11:40 PM
      • Document Archive
        Samsung Galaxy Book Ion NP930XCJ Notebook Specification for Upgrade or Repair
        by Document Archive
        This specification for the Samsung Galaxy Book Ion NP930XCJ Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the NP930XCJ boardview and NP930XCJ schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
        09-06-2024, 11:40 PM
      • Loading...
      • No more items.
      Working...