hi guys,
i've been working like crazy on this dvd/vcr combo for the past 3 days,hopefuly someone will give me more advice....
this unit will start all ok on vcr and about 10 second it will shutt down(power)
have to power back unit and cassette will eject....
so fare i tested tape start sensor(q1504) and tape end sensor(q1503) plus the t-reel(q1506)
i also did a big clean up and spay electronic cleaner every where i could find...
and also i forgot to say that the ic1501(pin 88,81 and 3 are ok)
when i do the jumper on tp502 and gnd,everything is working perfectly....
so now i really don't know if there is something else to check,ect....
any help will be appreciated,thank you.
i've been working like crazy on this dvd/vcr combo for the past 3 days,hopefuly someone will give me more advice....
this unit will start all ok on vcr and about 10 second it will shutt down(power)
have to power back unit and cassette will eject....
so fare i tested tape start sensor(q1504) and tape end sensor(q1503) plus the t-reel(q1506)
i also did a big clean up and spay electronic cleaner every where i could find...
and also i forgot to say that the ic1501(pin 88,81 and 3 are ok)
when i do the jumper on tp502 and gnd,everything is working perfectly....
so now i really don't know if there is something else to check,ect....
any help will be appreciated,thank you.