LG 60PV450UA is this a bad Plasma Display

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Alastair E
    replied
    Re: LG 60PV450UA is this a bad Plasma Display

    Aye--Doubt its the panel....

    It'll be a Sustain board or voltage way off type of fault. Check those ERC coils as suggested and check the various voltages as per Panel Label....

    Leave a comment:


  • freakaftr8
    replied
    Re: LG 60PV450UA is this a bad Plasma Display

    It looks like a zsus fault. Can we get clear pictures of the ysus and zsus boards? Mostly on the zsus there are these reddish colored coils. On the bottom of that board the solder is known to fracture and not make connection which can cause this symptom.
    Last edited by freakaftr8; 02-06-2016, 01:11 AM.

    Leave a comment:


  • Lisalisa101
    replied
    Re: LG 60PV450UA is this a bad Plasma Display

    The image is of snow at the bottom left corner and the rest of the screen is black except with some spots of snow all over the screen when it is set to ant input. Anyone please.

    Leave a comment:


  • Lisalisa101
    replied
    Re: LG 60PV450UA is this a bad Plasma Display

    No one can help me with this?
    Last edited by Lisalisa101; 02-06-2016, 12:51 AM.

    Leave a comment:


  • Lisalisa101
    started a topic LG 60PV450UA is this a bad Plasma Display

    LG 60PV450UA is this a bad Plasma Display

    Hi I just picked this TV up its a LG 60PV450UA plugged it up and had sound but no picture until I looked closer. Please see the attached pic. this at the bottom left hand corner. Is this a bad plasma display? The tv shows no signs of being hit or anything. Is this a common failure mode on Plasmas? Thanks for your help and ROLL TIDE
    Attached Files

Related Topics

Collapse

Working...