Lisalisa101
Member
Last Activity: 03-27-2018, 01:23 PM
Joined: 12-11-2015
Location: Fyffe Alabama
-
60pv450-ua troubleshooting
Hi I have a 60pv450 with a messed up picture. I have attached a picture of the screen. It has a yellow back ground.sound works. I have verified the voltages on the power supply. The control card is flashing 3 fast and 1 slow flashes. Any help would be greatly appreciated.... -
Re: LG 60PV450UA is this a bad Plasma Display
Just wanted to update everyone it was the Zsus board. Thanks for everyone's help. -
Re: LG 60PV450UA is this a bad Plasma Display
So do you think that one of these places that repairs the z sus board can fix this problem?Last edited by Lisalisa101; 02-06-2016, 04:41 PM.Leave a comment:
-
Re: LG 60PV450UA is this a bad Plasma Display
ok so if the Vacuum was lost there wouldn't be any picture at all correctLeave a comment:
-
Re: LG 60PV450UA is this a bad Plasma Display
The screen has no cracks or even scratches on it. Alastair what is mal-discharge?Leave a comment:
-
Re: LG 60PV450UA is this a bad Plasma Display
Reflowed the Solder on the coils on both boards no change. The picture just looks odd it looks like a mirror that the coating on the back of it has flaked off. With the lights off you can see little spots of snow all over the screen and in and the bottom left Corner see that as shown in the picture you can see snow this about 4" x 3". When a y or z sus board fails can it cause this type of failure?Leave a comment:
-
Re: LG 60PV450UA is this a bad Plasma Display
The image is of snow at the bottom left corner and the rest of the screen is black except with some spots of snow all over the screen when it is set to ant input. Anyone please.Leave a comment:
-
Re: LG 60PV450UA is this a bad Plasma Display
No one can help me with this?Last edited by Lisalisa101; 02-06-2016, 12:51 AM.Leave a comment:
-
LG 60PV450UA is this a bad Plasma Display
Hi I just picked this TV up its a LG 60PV450UA plugged it up and had sound but no picture until I looked closer. Please see the attached pic. this at the bottom left hand corner. Is this a bad plasma display? The tv shows no signs of being hit or anything. Is this a common failure mode on Plasmas? Thanks for your help and ROLL TIDE... -
Re: New Members - please post your introductions here
Hi everyone I'm new to your group. I love tinkering with stuff. There's not a better feeling than seeing something broken come back to live. I look forward to spending time with the group.
Thanks
BrianLeave a comment:
No activity results to display
Leave a comment: