UPDATE Samsung LN52B530P7F- Loud pop then dead

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mllwd2000
    Member
    • Dec 2015
    • 22
    • USA
    #1

    UPDATE Samsung LN52B530P7F- Loud pop then dead

    Finally got the components in and time to install them...... Works great
    I just wanted to thank everyone for the information, help and especially for everyone's patience with my questions and lack of knowledge.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • piposarcade
      Samsung UN50KU6300 dead no standby led
      by piposarcade
      Samsung UN50KU6300 dead no standby led

      01-04-2024, 01:33 PM
      Greetings to all, a while ago my TV was dead, it didn't turn on and the standby light was off, the next day it is working. But these days it no longer wants to turn on, I did some troubleshooting, I disconnected the main board, I checked the voltage on the backlight and there is 400 DC, when I connect it again the main board the voltage drops, in all that troubleshooting, miraculously the standby light comes on and the TV works. After an hour I check and test, I turn on the TV, the Stanby light flashes 3 times and it...
      05-22-2024, 02:07 PM
    • kevin_allein
      Samsung QE 75 Q 7 FGMTZG Power Supply dead
      by kevin_allein
      Hi, have this Samsung QE 75 Q 7 FGMTZG TV with no function. First analysis shows the power supply board is dead and fuse blown. Power Supply has the number BN94-11439A. I did short circuit test transistor and diodes and those do not appear to have shorts. I must admit I did not look at every single data sheet.
      In the TV was some black dust residue, so probably one of the electrolytic caps blew, but they do not show short either.

      Does anyone have schematics for that board ?
      Any good tip, what could be the issue ?
      ​
      02-27-2025, 12:15 PM
    • outsider
      Samsung NP350E update BIOS with dead battery
      by outsider
      Hello
      Samsung NP350E I need to update the BIOS to the latest version, but I have a dead battery and the application does not release me due to low battery level. Is there any way around it?
      Regards!
      01-20-2021, 04:23 AM
    • Document Archive
      Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
      by Document Archive
      This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
      09-07-2024, 05:50 AM
    • tvguy12012012120
      Zombie Samsung UN55NU6900F dead / no standby voltage - randomly came to life after hours of troubleshooting then died
      by tvguy12012012120
      This is my first attempt at troubleshooting a board like this, I know I could just buy a new board but I'm curious to figure out how this works. I've been testing different components in the evenings this week and I think the problem is with the IC failing to start up for some reason. When the board is plugged in there is no standby voltage.

      Then today it randomly sprung to life like a zombie but shortly died thereafter. I have no idea why it would have done that and its the first time I've seen it running. I discharged capacitors on the board last night, then it was sitting today....
      02-07-2025, 05:13 PM
    • Loading...
    • No more items.
    Working...