bush idlcd32tv27hd burn in mode

[djx1]

hi there, i have the above model tv and its stuck in a constant loop of solid red, solid green, solid blue colours on the screen. after a bit of googling it looks like this is something called burn in mode. how do i get rid of this mode, it just came on a few days ago on an otherwise perfect tv. thanks in advance

[djx1]

Re: bush idlcd32tv27hd burn in mode

Anyone got any ideas I'm stuck with this. Can't find out how to enter the service menu

[vinceroger69]

Re: bush idlcd32tv27hd burn in mode

Have you got the remote control in the service menu there is probably a setting to turn if of im not sure what main board this uses this is from another site
try this, enter the service menu by pressing install (maybe menu) button followed by 4725 the menu will come up,scroll down to factory reset and press the button to the right of the OK button it will tell you to press the green button do so, the tv will reset itself and it should go into standby mode then press a channel button and tv should come on.