Announcement

Collapse
No announcement yet.

Pioneer, PDP-5020FD intermittent, 8 blue blinks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Pioneer, PDP-5020FD intermittent, 8 blue blinks

    Hi, I have a PDP-5020FD which works intermittently.
    Sometimes it starts up and works fine and if I turn it off and back on, it will go to 8 blue blinks and will keep doing the 8 blue blinks and won't go on. However before it goes to 8 blue blinks mode, I can see a very dim light on the whole screen, like a TV without the back light and then it will shut itself off and will go to 8 blue blink mode.
    I saw in one of the post that the regulator ic IC7951 could have been gone but in my TV its fine and that's fine the TV works sometimes!

    #2
    Re: Pioneer, PDP-5020FD intermittent, 8 blue blinks

    When the blue light blinks, hold the DISPLAY key down on the side of the TV. The orange light should blink some times indicating a more specific error code. What code do you get?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #3
      Re: Pioneer, PDP-5020FD intermittent, 8 blue blinks

      I get 5 orange blinks.

      Comment


        #4
        Re: Pioneer, PDP-5020FD intermittent, 8 blue blinks

        When I hold the display button, I get 5 orange blinks.

        Comment


          #5
          Re: Pioneer, PDP-5020FD intermittent, 8 blue blinks

          Ok, that is different to what I got (one blink.)
          Did you check the voltage output of that regulator when the set is faulty?
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment


            #6
            Re: Pioneer, PDP-5020FD intermittent, 8 blue blinks

            I did the voltages on pin 2 (3+ V) and pin 4 (1.7 V) are ok.

            Comment


              #7
              Re: Pioneer, PDP-5020FD intermittent, 8 blue blinks

              Pin 4 should be 1.8V, not 1.7V. The drop could be important. When it works, can you check the pin to see if it goes up to 1.8V?
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment


                #8
                Re: Pioneer, PDP-5020FD intermittent, 8 blue blinks

                Sorry to get back to you late!
                The voltage on pin 4 was exactly 1.79V and 1.8V when the TV is on momentarily.

                so I decided to change the 2 boards with the guy on the ebay. I did that and I got the boards back today. I installed them but still the same exact problem!

                Comment


                  #9
                  Re: Pioneer, PDP-5020FD intermittent, 8 blue blinks

                  I have to admit though, the guy on the ebay is a honest guy! As soon as I told him about the modules are the same way, he refunded all my money!

                  Comment

                  Working...
                  X