Hi, new to this and first thread. Hoping for some advice please. As the title says standby light comes on a does power blue light after. Then nothing, no picture, menu or sound. I have tested all power cables coming off power board and values are good including a/c. All ok. Fuses good. Caps look good visually though not all tested out of circuit. Tested resistors, diodes on y sus. Ribbon pins on buffers. All good. I am now stuck as to what the problem is. Also done the jump wire test pattern for panel on main board but only got a red flash then nothing. Any
help and advice would be appreciated thanks.
help and advice would be appreciated thanks.