Announcement

Collapse
No announcement yet.

42" Hitachi 51F500 rear projection tv

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    42" Hitachi 51F500 rear projection tv

    The customer complains that the the video looks like it is in 3D, and there is green, blue and red on the screen within the picture. I don't have a scope, could this be a cap problem. I have a blue ESR meter. I also need the service manual and schematic. Where can I find it?

    #2
    Re: 42" Hitachi 51F500 rear projection tv

    If this is a rear-projection CRT set, it's probably bad STK convergence ICs.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #3
      Re: 42" Hitachi 51F500 rear projection tv

      Thanks Tom. Are these parts available at digikey or mouser?
      Last edited by tech2014; 09-08-2014, 01:59 PM.

      Comment


        #4
        Re: 42" Hitachi 51F500 rear projection tv

        Not that I'm aware of, but you can buy them from other online suppliers.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment


          #5
          Re: 42" Hitachi 51F500 rear projection tv

          tom, is it a good idea to buy the convergence repair kits or just the 2 STK ICs.

          Comment


            #6
            Re: 42" Hitachi 51F500 rear projection tv

            Just check the resistors RK42,RK46,RK62,RK58,RK50,RK54 and fuses fk01 and fk02, make sure they are not open.
            Last edited by R_J; 09-09-2014, 09:18 PM.

            Comment

            Working...
            X