Samsung lnt4071fs

[danimal112000]

Came home yesterday had this happening shut down tv unplugged and plugged everything back in, tv ran for 1-1.5 hours then it happened again couldn't get it back happening on all imputs, thoughts on what's going on and how exactly would you describe this

[harellis]

Re: Samsung lnt4071fs

I adjusted my board with a screw driver I'm pretty sure its like the vr scan and vs scan adjusting that brought me to your point and a small adjustment made it bo back to normal. Sorry I'm not a pro so hopefully someone else comes to your aid.

[tom66]

Re: Samsung lnt4071fs

^^^ Unfortunately your advice is applicable for a plasma... this is an LCD so is completely different inside.

To the OP, does the issue clear up after a few minutes? If you gently grab the edges of the frame and flex it, does it improve?

[danimal112000]

Re: Samsung lnt4071fs

Left the tv on for about 30 mins no change in what it did and flexing the edge didn't help either

[Shinju]

Re: Samsung lnt4071fs

Can you see any OSD menus when its like this?

Might want to go into the service menu and do test patterns to see if its mainboard, t-con or just a bad panel.

[danimal112000]

Re: Samsung lnt4071fs

How would I know which board it was and how screwed am I for each. It's a 7 year old tv so just trying to get a cost/benefit analysis

[danimal112000]

Re: Samsung lnt4071fs

I can't see the service menus at all

[danimal112000]

Re: Samsung lnt4071fs

I can't see the service menus at all

.