Vestel tv, how to flip the image?

[France_53]

Hi, it works perfectly, thanks! Are you basically giving the mirror control via USB? Well done! 😉


exactly, that was the original panel, but unfortunately it broke after changing the bars, and I took the other panel from the Telefunken TV

[yokoono]

It's ok.
1. Format a stick with FAT32
2. Create a folder called pq on the stick
3. Unzip and put the 2 files in the folder
4. Turn on the TV, USB stick and type MENU 4725
5. Go to USB Operations and type OK on the remote control
6. Wait 10 seconds and exit the menu (return, back)
7. Turn off the TV from the remote control
8. Wait until the stby LED on the TV stops flashing
9. Unplug the TV and wait until the stby light goes out.
10. Take out the stick and turn on the TV.
If the image is not correct, repeat the operation

L.E. The motherboard in the TV used the VES315WNDS-2D-N12 panel

[France_53]

Hi yokoono, I have done the operation and am attaching the zip file with the contents of the TV ... if I did well 😀

[yokoono]

Save the panel profile from the TV and post it here to return the image.
1. Format a stick with FAT32
2. Create a folder called downloadpq.mb110 on the stick
3. Turn on the TV and type MENU 4725
4. Go to USB Options and type OK on the remote control
5. After 10 seconds you can remove the USB stick and you will have some files on the stick.
6. You post them here.

[France_53]

Hello everyone from Italy, I'm here to ask for help on a Vestel TV, I've had a Vestel TV branded "XD" with a broken screen for years, but now I've found a Telefunken (still Vestel but older) and I've mounted the panel on the "XD" TV, it works, but the screen is upside down, given that Vestel does not allow you to rotate the image from the service menu, does anyone know how to solve the problem? the original panel is marked ves315WNDS-2D-N12 while the main board 17mb110, the panel I mounted instead in the tv (from the telefunken) is a ves315WNDA-02. ... It is not worth repairing the Telefunken because it is older and because the "XD" TV has new LED bars and T2 tuner... thank you very much