Look
Vestel tv, how to flip the image?
Collapse
X
-
Hi. Can you help me please i have Vestel 17MB140 with rotated imageAttached FilesLeave a comment:
-
I turned the image. Copy the profile to the TV. I think you know the procedure.
Attached FilesLeave a comment:
-
Hi! Can you help me? I had to replace the screen of a 17mb211s, the picture is good but it is upside down. I put this in it VES315WNDS-2D-N13(23391030)Attached FilesLeave a comment:
-
Hi, I’ve tried that a few times but it’s not working?
still no satellite tuner showing in source.
Happy to get picture sorted anyway, Satellite tuner was not being used anyway.
Thanks you so much 👍🏻
Leave a comment:
-
Profiles
1. Format a stick with FAT32
2. Create a folder called profile on the stick
3. Unzip and put the 3 files in the folder
4. Turn on the TV, USB stick and type MENU 4725
5. Go to USB Operations and type OK on the remote control
6. Wait 10 seconds and exit the menu (return, back)
7. Turn off the TV from the remote control
8. Wait until the stby LED on the TV stops flashing
9. Unplug the TV and wait until the stby light goes out.
10. Take out the stick and turn on the TV.
Attached FilesLeave a comment:
-
1. Format a stick with FAT32
2. Create a folder called downloaprofile.mb110 on the stick
3. Turn on the TV and type MENU 4725
4. Go to USB Options and type OK on the remote control
5. After 10 seconds you can remove the USB stick and you will have some files on the stick.
6. You post them here.Leave a comment:
-
A few hours on test and everything is going fine.
Digital Tuner, Scart, HDMI etc are all ok but the Sat Tuner has disappeared from source inputs?
This may have happened when I originally uploaded a version of software for the MB110P to see if it would correct the picture problem?? It’s not even showing in Service menu either?
Anyway, the picture is the correct way up now 🙂
Leave a comment:
-
Success but using a different method.
I followed to above instructions but after i pressed 'ok' on USB Operations i got a 'please wait' message on the screen but then after 3-4 seconds it reverted to the service menu screen with the picture still upside down.
What i then did was the regular update procedure.
Unplug TV and insert the USB
Hold 'OK' while plugging the tv in.
wait till standby light stops flashing
Unplug tv and wait for Standby light to go out
remove USB and plug tv in
power on.
Picture came on correct way and now working perfect.
Many thanks for the files yokoono!Leave a comment:
-
Panel profile. Inverted image
1. Format a stick with FAT32
2. Create a folder called pq on the stick
3. Unzip and put the 2 files in the folder
4. Turn on the TV, USB stick and type MENU 4725
5. Go to USB Operations and type OK on the remote control
6. Wait 10 seconds and exit the menu (return, back)
7. Turn off the TV from the remote control
8. Wait until the stby LED on the TV stops flashing
9. Unplug the TV and wait until the stby light goes out.
10. Take out the stick and turn on the TV.
If the image is not correct, repeat the operationAttached FilesLast edited by yokoono; 11-04-2024, 09:01 AM.Leave a comment:
-
Here are the files, hope they are correct.Attached FilesLeave a comment:
-
Main is 17MB110 ??
Panel is VES315WNDA-2D-N22 ??
Save the panel profile from the TV and post it here to return the image.
1. Format a stick with FAT32
2. Create a folder called downloadpq.mb110 on the stick
3. Turn on the TV and type MENU 4725
4. Go to USB Options and type OK on the remote control
5. After 10 seconds you can remove the USB stick and you will have some files on the stick.
6. You post them here.Leave a comment:
-
Hi, I currently have the same problem after fitting a donor screen. Perfect picture but upside down?
32” Walker tv with faulty screen ves315wnda-2D-N12 and I’ve replaced it with a donor screen VES315WNDA-2D-N22 from a 32” Bush. Both Vestel.
I’ve tried the method you have listed above but it’s not working? I maybe doing something wrong?
In post #4 you say to ‘put the 2 files in the folder’
Which 2 files?
When I recover information from the original screen I have 15 files on the USB stick.
ThanksLeave a comment:
-
oh, yes haha, well in that case yes, Telefunken would come out on this type of TV, I thinkLeave a comment:
-
Ah no no, it starts with the "XD" logo as with its original panelLeave a comment:
Related Topics
Collapse
-
MSI Summit E13 Flip Evo E13 FLIP EVO A11MT-018AU Hybrid (2-in-1) Specification for Upgrade or RepairThis specification for the MSI Summit E13 Flip Evo E13 FLIP EVO A11MT-018AU Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the E13 FLIP EVO A11MT-018AU boardview and E13 FLIP EVO A11MT-018AU schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...09-07-2024, 04:10 AM
-
This specification for the MSI Summit E16 FLIP A13VET-027BE Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the E16 FLIP A13VET-027BE boardview and E16 FLIP A13VET-027BE schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-07-2024, 06:38 AM
-
This specification for the MSI Summit E16 FLIP A13VFT-020BE Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the E16 FLIP A13VFT-020BE boardview and E16 FLIP A13VFT-020BE schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-07-2024, 06:38 AM
-
This specification for the MSI Summit E16 FLIP EVO A13MT-262BE Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the E16 FLIP EVO A13MT-262BE boardview and E16 FLIP EVO A13MT-262BE schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-07-2024, 06:38 AM
-
MSI Summit E13 FLIP EVO A11MT-216FR Hybrid (2-in-1) E13 Flip Evo Specification for Upgrade or RepairThis specification for the MSI Summit E13 FLIP EVO A11MT-216FR Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the E13 FLIP EVO A11MT-216FR boardview and E13 FLIP EVO A11MT-216FR schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...09-07-2024, 04:30 AM
- Loading...
- No more items.
Leave a comment: