Vestel tv, how to flip the image?

[Fugaz]

main is 17MB140

[yokoono]

Cod main (17MBxxx) ???
If I don't have a profile, save the panel profile from the TV and post it here.

[Fugaz]

Hi everybody.I have the same problem.Broken display VES315WNDB-2D-N22...Change display VES315WNDB-2D-N11..Now I have display upside down..Can you help me pls YOKOONO?

[AlexandruS]

Hello everybody !
Somebody brings me a Wellington with backlight problem, but because of transport, he broke the display. Wellington wl32hd279sw with 17mb110 mainboard and 17ips62 power supply panel ves315wnda-20-n21 .
i put a panel from an Horizon 32hl737h with mainboard 17mb82s , and panel i think is lsc320an10-a02 . It works, but image is upside down.
is there anything can do ?
Thank you in advance !

SOLVED WITH YOKOONO'S HELP !

[AlexandruS]

Hello everybody !
Somebody brings me a Wellington with backlight problem, but because of transport, he broke the display. Wellington wl32hd279sw with 17mb110 mainboard and 17ips62 power supply panel ves315wnda-20-n21 .
i put a panel from an Horizon 32hl737h with mainboard 17mb82s , and panel i think is lsc320an10-a02 . It works, but image is upside down.
is there anything can do ?
Thank you in advance !

[Arma2507]

Look

Thank you so much!! You are the best

[yokoono]

Hi. Can you help me please i have Vestel 17MB140 with rotated image

Look

[Arma2507]

Hi. Can you help me please i have Vestel 17MB140 with rotated image

[Lali0904]

Thank you very much! You are a great person!(Yokoono)

[yokoono]

I turned the image. Copy the profile to the TV. I think you know the procedure.

[Lali0904]

Hi! Can you help me? I had to replace the screen of a 17mb211s, the picture is good but it is upside down. I put this in it VES315WNDS-2D-N13(23391030)

[DanL15]

Hi, I’ve tried that a few times but it’s not working?
still no satellite tuner showing in source.
Happy to get picture sorted anyway, Satellite tuner was not being used anyway.
Thanks you so much 👍🏻

[yokoono]

Profiles
1. Format a stick with FAT32
2. Create a folder called profile on the stick
3. Unzip and put the 3 files in the folder
4. Turn on the TV, USB stick and type MENU 4725
5. Go to USB Operations and type OK on the remote control
6. Wait 10 seconds and exit the menu (return, back)
7. Turn off the TV from the remote control
8. Wait until the stby LED on the TV stops flashing
9. Unplug the TV and wait until the stby light goes out.
10. Take out the stick and turn on the TV.

[DanL15]

Here are the files

[yokoono]

1. Format a stick with FAT32
2. Create a folder called downloaprofile.mb110 on the stick
3. Turn on the TV and type MENU 4725
4. Go to USB Options and type OK on the remote control
5. After 10 seconds you can remove the USB stick and you will have some files on the stick.
6. You post them here.

[DanL15]

A few hours on test and everything is going fine.
Digital Tuner, Scart, HDMI etc are all ok but the Sat Tuner has disappeared from source inputs?
This may have happened when I originally uploaded a version of software for the MB110P to see if it would correct the picture problem?? It’s not even showing in Service menu either?
Anyway, the picture is the correct way up now 🙂

[DanL15]

Success but using a different method.

I followed to above instructions but after i pressed 'ok' on USB Operations i got a 'please wait' message on the screen but then after 3-4 seconds it reverted to the service menu screen with the picture still upside down.

What i then did was the regular update procedure.

Unplug TV and insert the USB
Hold 'OK' while plugging the tv in.
wait till standby light stops flashing
Unplug tv and wait for Standby light to go out
remove USB and plug tv in
power on.

Picture came on correct way and now working perfect.

Many thanks for the files yokoono!

[yokoono]

Here are the files, hope they are correct.

Panel profile. Inverted image
1. Format a stick with FAT32
2. Create a folder called pq on the stick
3. Unzip and put the 2 files in the folder
4. Turn on the TV, USB stick and type MENU 4725
5. Go to USB Operations and type OK on the remote control
6. Wait 10 seconds and exit the menu (return, back)
7. Turn off the TV from the remote control
8. Wait until the stby LED on the TV stops flashing
9. Unplug the TV and wait until the stby light goes out.
10. Take out the stick and turn on the TV.
If the image is not correct, repeat the operation

[DanL15]

Here are the files, hope they are correct.

[yokoono]

Main is 17MB110 ??
Panel is VES315WNDA-2D-N22 ??

Save the panel profile from the TV and post it here to return the image.
1. Format a stick with FAT32
2. Create a folder called downloadpq.mb110 on the stick
3. Turn on the TV and type MENU 4725
4. Go to USB Options and type OK on the remote control
5. After 10 seconds you can remove the USB stick and you will have some files on the stick.
6. You post them here.