Vestel tv, how to flip the image?

[yokoono]

Post here so we can see what file you have.

[Aladel]

Thanks a lot for your reply,
I am sure the code 4725 is now giving you the diagnostic mode not the service mode,
I am using a Samsung panel instead of the orginal one, the panel model number is
LSC320AN10-a02
I can take of the bios of it and read it, but what modifications i need to do with the file to fix my issue

[yokoono]

1. At Vestel, you enter SM with MENU 4725
2. I haven't had any TVs with 17MB481 repaired
3. I haven't found the option to rotate the image in SM
4. To do this, you need the panel profile. I don't know if the panel profile can be saved on the 17MB481.

[Aladel]

Hi, I am looking for the service menu for vestel tv, but the code usually used 4725 is not working anymore, it show diagnostic menu and no usb or any other options,
I tried many codes with no luck.
I have toshiba 17MB481 and I am the pic is upside-down because of changing the panel

[fatflow]

Hi

I made a small tool to change the panel settings for 17MB211 mainboards.
You can mirror the image and invert the bits/colors with it. If anyone wants to try it's available in my GitHub.

https://github.com/notiren/17mb211_flasher

[yokoono]

Good. ✌

[fdurzu@gmail.com]

It works! Thank you so much for your support yokoono 😀

[yokoono]

I turned the image into the panel profile you posted.

[fdurzu@gmail.com]

It’s 17MB181TC, there’s a typo in the file name, sorry!

[yokoono]

17MB110 or 17MB181TC ??.

1. Format a stick with FAT32
2. Create a folder called pq on the stick
3. Unzip and put the 2 files in the folder
4. Turn on the TV, USB stick and type MENU 4725
5. Go to USB Operations and type OK on the remote control
6. Wait 10 seconds and exit the menu (return, back)
7. Turn off the TV from the remote control
8. Wait until the stby LED on the TV stops flashing
9. Unplug the TV and wait until the stby light goes out.
10. Take out the stick and turn on the TV.
If the image is not correct, repeat the operation

[fdurzu@gmail.com]

Hello, same issue here (flipped image): Telefunken TV mod. TE32550B42V2DW, board 17MB181TC, panel VES315WNQX - L3 - N01.

Thank you!

[yokoono]

Worked perfectly!
Thanks so much for all your (and lightning) help!

Kind regards,

It could have been faster.😁😁

[Gyannini]

Worked perfectly!
Thanks so much for all your (and lightning) help!

Kind regards,

[yokoono]

Thanks so much Yokoono, it worked perfectly!!!
I'll now start to investigate my 2nd challenge, to fix the colours

Kind regards from Portugal

Try

[Gyannini]

Thanks so much Yokoono, it worked perfectly!!!
I'll now start to investigate my 2nd challenge, to fix the colours

Kind regards from Portugal

[yokoono]

Hi, good afternoon!

Same problem here. I've installed a vestel 17mb211 on my TV and the image is flipped upside down.
I've tried to follow your instructions for folder downloadpq.mb211 and I've got the attached files.

Are you able to help one more time, yokoono? Thanks in advance for any help!

Look.
1. Format a stick with FAT32
2. Create a folder called pq on the stick
3. Unzip and put the 2 files in the folder
4. Turn on the TV, USB stick and type MENU 4725
5. Go to USB Operations and type OK on the remote control
6. Wait 10 seconds and exit the menu (return, back)
7. Turn off the TV from the remote control
8. Wait until the stby LED on the TV stops flashing
9. Unplug the TV and wait until the stby light goes out.
10. Take out the stick and turn on the TV.
If the image is not correct, repeat the operation

[Gyannini]

Hi, good afternoon!

Same problem here. I've installed a vestel 17mb211 on my TV and the image is flipped upside down.
I've tried to follow your instructions for folder downloadpq.mb211 and I've got the attached files.

Are you able to help one more time, yokoono? Thanks in advance for any help!

[yokoono]

Operating windows 11 and dont have option for FAT32...is there any other option for formatting?

Ask a friend for help.

[Buddens]

Operating windows 11 and dont have option for FAT32...is there any other option for formatting?

[yokoono]

its a panel board from a luxor vestal tv to a toshiba tv
image is upside down. the main board is called 17mb211s

Save the panel profile from the TV and post it here to return the image.
1. Format a stick with FAT32
2. Create a folder called downloadpq.mb211 on the stick
3. Turn on the TV and type MENU 4725
4. Go to USB Options and type OK on the remote control
5. After 10 seconds you can remove the USB stick and you will have some files on the stick.
6. You post them here.