Announcement

Collapse
No announcement yet.

Samsung Plasma TV interference

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung Plasma TV interference

    My brother in law has a large Samsung Plasma TV ,on the left hand side of the display there is a vertical band of interference ,when I was a TV engineer we used to call this "a string of pearls" ,and was caused by the tuner or IF strip picking up something from the line output stage.
    Does anybody know anything about this sort of problem ?

    thanks

    Barry Wilkins

    #2
    Re: Samsung Plasma TV interference

    Probably a panel failure (plasma panel failed), but would need a picture to confirm, can sometimes just be a loose connector for that part.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #3
      Re: Samsung Plasma TV interference

      Thanks for the info , It cant be a failure because the picture is all there ,so perhaps it is a connection problem of some kind causing poor earthing so there is pick up of interference.

      Barry

      Comment


        #4
        Re: Samsung Plasma TV interference

        While that is possible, it is rather rare with modern displays.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment


          #5
          Re: Samsung Plasma TV interference

          Barry can you post a picture? RF interference is a problem on older CRT TV's receiving analog signals, not very common on todays digital TV's. See if your problem shows up on the digital channels or input a DVD signal. Most likely it is a failure on the plasma panel.

          Comment

          Working...