Toshiba Regza - 42RV555D

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cholzberger
    Member
    • Sep 2012
    • 29
    • Germany

    #1

    Toshiba Regza - 42RV555D

    Hi,

    just troubleshooting this monitor,

    The Power Supply is a Toshiba - PE0620 Version: V28A000841A1

    i found the resistor r809 to be open.

    i expect it should be at 3.7k ohm. now i wonder if this is correct.
    Attached Files
    Last edited by cholzberger; 10-21-2012, 01:09 PM. Reason: more info
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Toshiba Regza - 42RV555D

    It is normal for that resistor to appear open, it is usually around a few meg-ohms, it is a safety resistor.

    What is the fault with the TV?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • cholzberger
      Member
      • Sep 2012
      • 29
      • Germany

      #3
      Re: Toshiba Regza - 42RV555D

      the screen never turns on,
      standby led is on, 4.9V and 3.5 V are going to the logic board.
      but there is no POW_PRO, POW_SIG... (when i press or unpress the button)

      at the moment iam searching for open fuses, but everything i checkd this far looks good.

      logic-board is a Toshiba - PE0649V28A000865A1
      Last edited by cholzberger; 10-21-2012, 02:08 PM.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Toshiba Regza - 42RV555D

        The main board is getting standby voltages, but never sends power signal?

        If you get a 470 ohm resistor, you should be able to control power on line without the main board connected, which will eliminate the PSU from the problem.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • cholzberger
          Member
          • Sep 2012
          • 29
          • Germany

          #5
          Re: Toshiba Regza - 42RV555D

          Update on this one,

          the powerboard has ~ -3 V on POW_PRO and ~ - 4.9V on AC_DET of the lower connector.

          And there is -5 V on POWER_TV. which should turn on the main power supply i guess, but there is no other voltage comming up.

          Can you give me some hin on what else should be jumpered? i attached an picture of the power board connectors but iam not really shure where to put the 3v / or i guess -3 V on this tv.

          Another sympthom:
          I hear a high frequent sound comming from the powerboard which dissapears when i press the power button.
          Attached Files
          Last edited by cholzberger; 10-22-2012, 07:26 AM.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: Toshiba Regza - 42RV555D

            When you press the power button, does POWER_TV change at all?
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • cholzberger
              Member
              • Sep 2012
              • 29
              • Germany

              #7
              Re: Toshiba Regza - 42RV555D

              Nope no change when i press the button?!

              But i got other (strange) readings this time
              POW_PRO is at -1.6 Volts and AC_DET is at -3.5 Volts

              POWER_TV also only gets -3.5 Volts this time?!

              It makes no difference if i use casis or gnd pin as ground.

              really weird behaviour?!

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: Toshiba Regza - 42RV555D

                Have you got the black probe in COM, red probe in Volt/Ohm?
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • cholzberger
                  Member
                  • Sep 2012
                  • 29
                  • Germany

                  #9
                  Re: Toshiba Regza - 42RV555D

                  argh sorry my fault, all are positive voltages.

                  but 1.6 and 3.5 Volts only, i am not really sure what to search for next?! bad transformator?
                  Last edited by cholzberger; 10-22-2012, 03:43 PM.

                  Comment

                  • tom66
                    EVs Rule
                    • Apr 2011
                    • 32560
                    • UK

                    #10
                    Re: Toshiba Regza - 42RV555D

                    Since the power on voltage does not change, I suspect the main board is at fault here. Using a 470 ohm resistor, you can change the power on voltage and check all the power supply outputs come to the right voltage. You need to connect from POWER ON to GROUND, then you can test the 24V, if it then comes to 23.5 - 24.5V the PSU is most likely OK. But if it doesn't, I would suspect the main board is attempting a self-test of PSU (it is common with Toshiba) and this is failing.
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • Chrissp
                      New Member
                      • Aug 2014
                      • 2
                      • Germany

                      #11
                      Re: Toshiba Regza - 42RV555D

                      Hi. I have the same problem, only 1,6V on pow_pro, 3.5V on ac_dec, but
                      power_tv get s 3,5 volt, change to 0, then 2,5 then 3,5 Volt again. Standby LED is on,
                      but nothing else is going. My tv had a lightning strike. (3.3 Ohm resistor and bridge rec. changed). The standby ic reads 15,6 V. 390V on main cap.
                      What else can i do?

                      (sorry for my english, i m from germany)

                      Greetings, Christian

                      Comment

                      • Chrissp
                        New Member
                        • Aug 2014
                        • 2
                        • Germany

                        #12
                        Re: Toshiba Regza - 42RV555D

                        Found it. hdmi chip on mainboard is burned. Think i need a new mainboard.

                        Comment

                        Related Topics

                        Collapse

                        • Document Archive
                          Toshiba Satellite Pro C660-1NQ Specification for Upgrade or Repair
                          by Document Archive
                          This specification for the Toshiba Satellite Pro C660-1NQ can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the C660-1NQ boardview and C660-1NQ schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
                          09-06-2024, 05:27 AM
                        • Document Archive
                          Toshiba Satellite L635-10K Notebook Specification for Upgrade or Repair
                          by Document Archive
                          This specification for the Toshiba Satellite L635-10K Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the L635-10K boardview and L635-10K schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
                          09-06-2024, 05:59 AM
                        • Document Archive
                          Toshiba Satellite L655-1DJ Notebook Specification for Upgrade or Repair
                          by Document Archive
                          This specification for the Toshiba Satellite L655-1DJ Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the L655-1DJ boardview and L655-1DJ schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
                          09-06-2024, 05:59 AM
                        • Document Archive
                          Toshiba Satellite L655-19C Notebook Specification for Upgrade or Repair
                          by Document Archive
                          This specification for the Toshiba Satellite L655-19C Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the L655-19C boardview and L655-19C schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
                          09-06-2024, 05:59 AM
                        • Document Archive
                          Toshiba Portege Z30-C Notebook Specification for Upgrade or Repair
                          by Document Archive
                          This specification for the Toshiba Portege Z30-C Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Z30-C boardview and Z30-C schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba Portege...
                          09-06-2024, 05:33 AM
                        • Loading...
                        • No more items.
                        Working...