Panasonic Plasma TH-P42X28K A-Board @ Mainboard Schematic needed

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SACR
    Member
    • Jul 2019
    • 30
    • Malaysia
    #1

    Panasonic Plasma TH-P42X28K A-Board @ Mainboard Schematic needed

    I need Schematic A-Board @ Mainboard for Panasonic Plasma TH-P42X28K. Code : TNPH0842. I want to replace 1 MLCC but I don't know values (capacitance & voltage) & codes. Can someone help me? Thank you
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Last edited by SACR; 11-20-2023, 11:59 PM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • riverwind
      Need schematic of DAG3MCBMAE0 rev: E mainboard found in HP Victus 16
      by riverwind
      I am looking for schematic and component placement diagram for my hp victus 16 (i5 - 12500H version). Mainboard number is DAG3MCMBAE0 rev:E. After changing thermal paste, cpu fan starts spinning at high speeds even after cold boot. I can read cpu temperature by hardware monitor app and it is not high (about 40 celcius and fan is spinning loud.). I had checked the fan speed control pwm and see that it is constantly sweeping between %10 to %60 (sweeps 10% to 60% and tuns back to 10% and cycle continues in this pattern). I need schematic to troubleshoot. Any advice welcome.
      11-02-2025, 07:32 AM
    • Thetechdude
      MSI Ventus RTX 4080 16G Broadview schematic needed
      by Thetechdude
      Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.

      I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.

      Thanks.
      07-15-2025, 11:15 AM
    • jm1234
      Panasonic plasma TX-P42ST50 - 6 blinks
      by jm1234
      Hi,
      anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
      It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
      I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
      I checked that board for any obvious faults...
      05-22-2024, 06:59 AM
    • Ludmilaharhordina
      needed 6-71-p872l-d02 schematic and boardview
      by Ludmilaharhordina
      please help
      needed 6-71-p872l-d02 schematic and boardview...
      09-20-2025, 05:42 AM
    • topway
      Gigabyte B650 GAMING X AX schematic needed
      by topway
      Hi guys, Gigabyte B650 GAMING X AX is NG, need schematic repair,
      if anyone can share a schematic.

      Thanks.
      09-08-2025, 06:37 AM
    • Loading...
    • No more items.
    Working...