Canon Pixma MG5420 - won't turn on

anupkg1985

Senior Member

Join Date: Sep 2020

Posts: 180

Country: USA
#1

Canon Pixma MG5420 - won't turn on

04-20-2022, 11:23 AM

Hi,

I have canon pixma mg5420 printer, which worked till yesterday night. However today morning it gave up to turn on. I checked the power adapter which has 5 pins, 8v and 10v standby voltages are present on it. Also doing a jump start with resistor and control pin, it rises up to 24V and 32v which is expected o/p. Could someone tell me the next step to isolate the issue?
Tags: None

Previous template Next

Anycubic Photon 5.5 3D printer 25Q32 flashrom dump needed

by re-atari

Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.

Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he...
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
02-03-2025, 06:49 PM
Hi i need dump of canon pixma g2420

by krimo

Hi i need dump of canon pixma g2420 i have error 6800 thanks
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
09-11-2024, 03:37 AM
i need dump for printer canon G3430

by Yasou Yasou

Hello guys,

Does somebody has this dump for printer canon G3430
Thank you in advance
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
04-22-2024, 10:50 AM
Canon G3100 printer won't turn on

by Sergio Kub

I'm trying to repair a printer that at first does not turn on and replacing the logic board with one from another good machine, turned on and performed functions normally, confirming the defect in that board.
This board has 2 BGA ICs and one that looks like a microcontroller written on the body C2025 6CWG4 AI08.
I could not find the Datasheet of this component or the wiring diagram for this card or printer.
Can anyone help me on these issues?
I thank you very much
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
06-25-2020, 12:13 PM
Lenovo Y700-17ISK turn on and off

by pajdek

Hello, i have some issues with my laptop Lenovo Y700-17ISK (motherboard BY511 NM-A541), it started when i turn on the laptop, but the lcd wont turn on, i then connected it via hdmi to tv and screen was ok. So i thought maybe lcd stripe is faulty, i removed the bottom cover, disconnected main battery, reset the cmos by disconnecting battery for 1 min, then slighty move the lcd stripe. Conncted power supply and tuned on my laptop, the lcd turn on, it started to load os, then it turn off, after a second it turn on, then after like 3 seconds turn off again, and so on. Removed power supply, waited...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
09-20-2023, 02:49 AM
Loading...
No more items.

Canon Pixma MG5420 - won't turn on

Canon Pixma MG5420 - won't turn on

Related Topics