Rainmax RX-470 XP Schematic

guilli

New Member

Join Date: Nov 2011

Posts: 2

Country: Canada
#1

Rainmax RX-470 XP Schematic

05-24-2018, 10:56 AM

Hello everyone, I modify power supply to make pyrograveur. (For modifications I control the output power with a PWM blower.The heating element is nichrome wire.)

I need to disable the protection (lm339n) on an RX-470 XP raidmax power supply. I can not find the shematic of this power supply. Do you have this schematic or have an idea or find it?

Luc
Tags: None

Previous template Next

Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?

by Tynan Dill

I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

Upon bringing it home and plugging it up, it showed a standby light.

I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

The screen seems to blackout and stay black, but with a flashlight I can see the display.

With my Playstation 4 connected via HDMI, and running a game I can hear sound.

Assuming...

7 Photos
- Channel: Troubleshooting TVs and Video Sources
11-22-2024, 01:46 PM
Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply

by sam_sam_sam

I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
- Channel: General Electronics Technical Discussion
03-31-2024, 02:12 PM
Starlink GEN2 Router Internal Power Supply Chicony UTP-211C Schematic

by Russ1

Sick of seeing big numbers of these routers dead no power light underneath.....
Chasing Schematic of this power supply I have searched high and low....
Already spotted a few swollen caps, but Ac fuse ok.....
This is a dual output 50Vdc 2.5A and 12Vdc 1.25A psu

Can anyone help with any type of schematic and parts list ?

Thanks and Regards, Russ

1 Photo
- Channel: Troubleshooting & Designing Networks
07-10-2025, 11:01 PM
Philips TV Power Supply LED Driver MSD3463-T8C2 Schematic

by Document Archive

Philips TV Power Supply LED Driver MSD3463-T8C2 Schematic...
- Channel: Schematics and Boardviews
11-06-2024, 03:47 AM
Samsung Led TV Power Supply BN44-00428B Schematic & Repair Guide

by Document Archive

Samsung Led TV Power Supply BN44-00428B Schematic & Repair Guide...
- Channel: Schematics and Boardviews
10-18-2024, 09:59 AM
Loading...
No more items.

Rainmax RX-470 XP Schematic

Rainmax RX-470 XP Schematic

Related Topics