Request schematic and possibly boardview for Apple 24" iMac A1225 Liteon PA-3241-02A1
Thank you,
Mike
Thank you,
Mike
-
Last edited by SMDFlea; 11-05-2023, 03:31 AM. -
See if this is the right one
-
Apple iMac 24 A1225 K51 Schematic & Board View
051-7973
051-7840...10-02-2024, 02:08 PM -
Apple MacBook Pro and iMac Schematic & Board Vie
A2991 2023 820-02935 16 M3
A2780 2023 820-02652 16 M2
A2439 2021 820-02009 iMac 24... -
Hi there,
I'm looking for anyone who might have information on Apple's embedded Apple Watch charging daughterboard, ID 820-02601. This is currently used by Anker in their Apple Watch charging products, but likely by other Apple partner brands as well.
You can see the board referenced in ChargerLab's teardown of the Anker Y1811 3-in-1 MagSafe cube - they discuss the "Apple Watch wireless charging circuit" about 2/3rds down the page. It's not pictured, but the board ID reads 820-02601-A, which sure sounds like Apple.
This daughterboard uses an interesting...04-21-2025, 11:41 PM -
Hi,
I got a iMac pro A1862 820-00967 in dead conditions, restored in apple configurator successfuly.installed macOS Catalina from internet recovery successfully but after installation it boots with apple logo way to the half of progress bar and shuts down.replugged 2 ssd's of 512GB and cleaned all the RAMs.Still not completely booting.tried PRAM reset but lo luck.Can any one guide me what should I do next. -
Hi! This will be my first post on these forums, but after browsing for a long time I trust you guys the most to help me out with switchmode power supply issues.
For a preface, I just came into possetion of two 2009 iMacs, a 20" a1224 and the 24" a1225 that I am currently working on. (The a1224 has a problem with either the inverter or the screen, but there's an inverter on the way - so we shall see!)
The 24" iMac I am working on has a problem with the power supply. For those that don't know, iMac's have four diagnostic LED's that are used to diagnose...
Comment