KRUG 14" UMA Rev. A02 10ELT16G001-A, of FOXCONN schematic required. if any body have this please.
Schematic of Latitude E5420 required
Collapse
X
-
Re: Schematic of Latitude E5420 required
Hope this helps -
Re: Schematic of Latitude E5420 required
also foundAttached FilesComment
-
Re: Schematic of Latitude E5420 required
Found some moreComment
-
Re: Schematic of Latitude E5420 required
where you able to get the schematic please, I'm in of the schematic to the exact board you posted as I have on my table with a burnt component that needs to be identified.Comment
Related Topics
Collapse
-
-
by Gururekre8Hi
I'm looking for the schematics for Dell Latitude 7310 (The Motherboard Model is LA-J261P). It is a 10th Gen Notebook.
Would very much appreciate your help.
Thank you.-
Channel: Schematic Requests ONLY!
-
-
by KeokigHello,
I am looking for the Dell Latitude 9520 Schematic diagram (PDF) and the Boardview file. Here is my laptop information.
Model: Dell Latitude 9520
S/N (Service Tag): CYBZ6D3
CPU: 11th Gen Intel core i7-1185G7 @3.00 GHz
GPU: Intel Iris Xe Graphics
HD/SSD: not installed
Motherboard Model number: (Compal) GDA55 LA-K441P
***Picture of motherboard with model number attached***
If I need to add any other information please message me!1 Photo-
Channel: Schematic Requests ONLY!
-
-
by Sine-AudioHi!
Looking for a schematic and/or boardview for Dell Latitude 7440 - LA-M591P (Compal IDC40/60).
Hopefully someone can help me.
Thank you in advance!-
Channel: Schematic Requests ONLY!
03-07-2025, 12:51 PM -
-
by hemant_2222Hello Friends,
Greetings!
I have taken this active subwoofer from Wharfedale for restoration. This is already in a bad shape as far as the connections goes. It has already been worked by local technicians. The most important part that I am looking forward is the schematic diagram, as there is jumper placed and a track has been cut, as if to bypass the actual connection. I am not sure if this is by design or someone has tried something to achieve.
Another thing is the TDA7294 was badly treated with its legs cut and it had a crack too, so I have replaced it...-
Channel: Troubleshooting Audio Equipment
-
- Loading...
- No more items.
Comment