Hi guys, I'm looking for a schematic and boardview for an HP with no video problem. Pleeeease =)
Model: HP 15-f113ca
Motherboard: DAU88MB6A0 Rev A
Thanks in advance!!
Model: HP 15-f113ca
Motherboard: DAU88MB6A0 Rev A
Thanks in advance!!
-
hello firends
i search the schematic or boardview
I have this motherboard, but I can't find the schematic or the boardview.
The problem is that on the chip marked where 3V should be, there are 5 volts, which indicates that the two are connected.
So the computer doesn't turn on, and the 3V disappears after a few seconds.
The original problem was that when I turned off the computer, the fan stayed on and saw that it was bad since it was directly in the 5V area.
The new problem arose after removing the bad chip.
3V and 5V remained together,...08-19-2025, 08:25 PM -
HP ProBook X360 11 G3 ee (winbook) schematic and boardview thanks
Looking for schematic and boardview
Model: HP ProBook X360 11 G3 EE
Serial: SCG9114JG7
Motherboard: L43774-601
defect: touchscreen doesn't work (touch works on another computer)
thanks to all​ -
HP ProBook X360 11 G5 ee (winbook) schematic and boardview thanks
Looking for schematic and boardview
Model: HP ProBook X360 11 G5 EE
Serial: SCG0164QLH
Motherboard: L83950-601
defect: no POWER
thanks to all​01-29-2025, 08:11 AM -
Hello. I have broken MB GIGABYTE GA-B85M-D3H rev 2.0.
Does anyone here have a electrical schematic or boardview ? Or best both of them
As electronic hobbys i'm trying to repair it but without schematic and boardview it's hard. -
My motherboard has recently gone out. Seems to be something on the VSB circuits, which I was already suspicious as I went through 5 PSU's in 5 years, most of which had damaged VSB circuits, but It stopped working a week ago, I thought it was the PSU again, but a new one didn't remedy the no start, I walked away with it hooked up and came back in and it was on and running all on its own, shut it down and it wouldn't turn on again, after about 5 button presses it turned on and worked fine until this sunday, It wouldnt start, so I tried swapping psu's, I then noticed a slight whine, and noticed the...