Macbook pro M1 A2338 820-02020 schematics boardview

[phil0072]

Re: Macbook pro M1 A2338 820-02020 schematics boardview

I have fixed the issue above in BVR.

Many thank for this great work

[Sergio Kub]

Thank You.

[ntsif]

Thanks to you whizkidz and DerekChen65535

[condensadorentrolitico]

thanks

[franzb1]

thank you

[casablanca]

thank you so much friend

[dreamflowers09]

thank you very much friends

[astyrcz]

Thanks whizkidz

[rsjp2]

Thank you very much

[casablanca]

THANK YOU

[Saratoga MicroSoldering]

Thank You!

[Siddig]

Re: Macbook pro M1 A2338 820-02020 schematics boardview

Finally finished the task of creating the board view file and cleaning the schematic pdf

So if you find any error please reply here and will see if a can and/or want to correct them. ( 1 SIDE NOTE the ic UP102 and components are not on the actual board but are there to connect the signals)

So enjoy the hard work.

thank you so much

[jesi]

thankyou

[Jcbasi]

Thankssssss

[zippylin]

thank you

[charles75328]

Thank youuuu very much!

[liz208]

Re: Macbook pro M1 A2338 820-02020 schematics boardview

I have fixed the issue above in BVR.

thanks alot

[zippylin]

Thanks Whizkidz, the file is helpful.

[gulfam shahzad]

subject: BVR file

pleas can somebody guide me for open the BVR file . what need to do convert it or is there any specific software for open it.

[Javier4577]

Re: Macbook pro M1 A2338 820-02020 schematics boardview

Finally finished the task of creating the board view file and cleaning the schematic pdf

So if you find any error please reply here and will see if a can and/or want to correct them. ( 1 SIDE NOTE the ic UP102 and components are not on the actual board but are there to connect the signals)

So enjoy the hard work.

Thanks for the hard work!!!!