Asus X555DG schem + BV please?

[inflex]

While I already have the X555LD, unfortunately it's not quite a suitable match for the LVDS connector area for what I need to service.

Anyone have this one?

[nabilgo]

boardview asus x555dg rev 2.0

boardview asus x555dg rev 2.0

[dqtech]

Looking for schematic/boardview asus x555

please help if anyone have schematic or boardview X555DG MAIN BOARD REV 2.0

[arthurmod]

Re: Looking for schematic/boardview asus x555

[dqtech]

Re: Looking for schematic/boardview asus x555

tq so much sir

[ch3nzu]

Re: boardview asus x555dg rev 2.0

thanks bro. this is what i need.

[ch3nzu]

Re: Looking for schematic/boardview asus x555

thanks for the boardview, is there anyway i can find the value of PR8823? I cannot find it in that boardview.
Or does anyone have repair guide pdf for asus x555dg?

[andreynew1]

Re: Looking for schematic/boardview asus x555

"value of PR8823" Probably the pull down resistor to ground. Value "RES 0 OHM 1/16W (0402) 5% CYNTEC/RR0510S-000-XN "

[ch3nzu]

Re: Looking for schematic/boardview asus x555

"value of PR8823" Probably the pull down resistor to ground. Value "RES 0 OHM 1/16W (0402) 5% CYNTEC/RR0510S-000-XN "

Oke thanks, andrey. I already tried to removed the resistor and measured it 0.8 OHM, so that mean normal then.
So pin no 72 on EC ITE will be shorted to ground too then.

[osmal]

Re: boardview asus x555dg rev 2.0

nabilgo... thanks bro. i need this view for that model

[ycok]

Re: boardview asus x555dg rev 2.0

thank you

[etech]

Re: Looking for schematic/boardview asus x555

tq so much sir

Please send me x555 schematic

[pixelbilisim]

Re: boardview asus x555dg rev 2.0

thank you

[st33693]

Re: boardview asus x555dg rev 2.0

thanks a lot

[marcoalvarez]

ASUS X555DG Rev 2.0 shematic PLEASE

help i need schematic please

[amirarbabi]

Re: Asus X555DG schem + BV please?

thank you

[lexa89]

Thank you are all so much for BV!
Anybody has BIOS/UEFI for X555DG Rev. 2.0? I need for BIN-file with "clean" ME (i.e. "Configured" but not "Initialized").

[SMDFlea]

https://www.badcaps.net/forum/troubl...f-this-section