GOOD MORNING EVERY ONE
IF ANY ONE HAVE KINDLY GIVE THE '' ACER GATEWAY NE46Rs '' LAPTOP MOTHER BOARD SCHEMATIC DIAGRAM
IF ANY ONE HAVE KINDLY GIVE THE '' ACER GATEWAY NE46Rs '' LAPTOP MOTHER BOARD SCHEMATIC DIAGRAM
-
Acer Aspire 5252 5552 (Gateway NV50A) Laptop Schematic
LA-6552P...10-21-2024, 04:42 AM -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this... -
Hi, I am looking for schematics for an Acer Predator 17 G9-793-73A6?
I can not read the last digit, maybe 6.
In another topic I found a boardview that seems to match mine: Acer Predator 17 G9-793 - Pegatron MU5DC CH7DC BoardView
But in the same topic schematics don't match (both board view & mine) : Acer Predator 17 G9-793 - Pegatron MU5DC CH7DC REV 2.0
On this mainboard, the GPU is dead (shorted), but I am trying to have it booting without the GPU Nvidia, to disconnect GPU I have desolder 3 coils powering the GPU, and one bigger in upstream these 3.
Now it begin... -
Hi there all, Merry Christmas and Happy New Year!
Looking for advice, Need to restore/fix the damaged Acer Aspire 514 -54 power circuit pathways.
I am not good at reading schematics and have difficulty finding the board viewer schematic or simple schematic for damaged parts, but I have all the tools and experience for micro-soldering. All I need to figure out is which ends (from-to) and trace wires to restore lines.
Hope the pictureS are clear enough to see the problem... -
Dear all!
I need the schematic of Acer Swift Go 14 IH4ST LA-M721P. Can someone help me?Yesterday, 11:32 AM
Comment