New Members
Please consider donating to this site if it has helped you. We rely on these donations.
Please also introduce yourself here Introduce yourself here.
And finally, Read the Forum rules here.
Findings : i disconnect the vcc from the circuit using jumper 1505 and test the output of the 2Z-3F F0V ic it produces 1.8v so i injected a 1.8v in the vcc of the eeprom and somehow the processor is heating up and it draws 2.090 amps.
my question is how much current does this ic can produce at normal level. does the 1.8vALW powered the processor.
Never stop LEARNING because life never stops TEACHING!
Comment