CPU fan is not working. I replaced the fan, it is a still a no-go.
The fan has 4 pins:
1. Ground
2. 5V
3. PWM controlled.
4. 12.6V
Pin 2 is showing always on 5V. Pin4 is showing always on 12.6V which is correct.
When running diagnostics on the CPU fan, pin 3 always stays @ 0V and the diagnostics module reports not being to find the CPU fan. I don't have the schematics for this board. I assume the PWM chip is bad but without the schematics, where can I find it?
Thanks.
The fan has 4 pins:
1. Ground
2. 5V
3. PWM controlled.
4. 12.6V
Pin 2 is showing always on 5V. Pin4 is showing always on 12.6V which is correct.
When running diagnostics on the CPU fan, pin 3 always stays @ 0V and the diagnostics module reports not being to find the CPU fan. I don't have the schematics for this board. I assume the PWM chip is bad but without the schematics, where can I find it?
Thanks.
Comment