Hello everyone.
I have a GK7MR0R (XMG Core 17) The device does not start. When I press the power button, the device tries to start and draws 0.8A for a second. According to the schematic, the following voltages should be present in the connected power supply unit and these are also present:
+5VALW
+3VALW
+3VALW_PCH
+1.8V_PRIM
+1.05VO_OUT_FET
The battery is being charged.
First I tried to rewrite the BIOS, same behavior.
Another user had the same behavior and his chipset was defective. I also changed the chipset, same behavior.
I disconnected the GPU and CPU inductors as a test, same behavior. I have not found a short circuit anywhere.
I have no idea what to do next.
Can anyone help me?
THX
I have a GK7MR0R (XMG Core 17) The device does not start. When I press the power button, the device tries to start and draws 0.8A for a second. According to the schematic, the following voltages should be present in the connected power supply unit and these are also present:
+5VALW
+3VALW
+3VALW_PCH
+1.8V_PRIM
+1.05VO_OUT_FET
The battery is being charged.
First I tried to rewrite the BIOS, same behavior.
Another user had the same behavior and his chipset was defective. I also changed the chipset, same behavior.
I disconnected the GPU and CPU inductors as a test, same behavior. I have not found a short circuit anywhere.
I have no idea what to do next.
Can anyone help me?
THX