Hi
Please send schematic and boardview for HP470 G7, SNAPE92 6050A3107701 MB A01 motherboard
Thank you
Please send schematic and boardview for HP470 G7, SNAPE92 6050A3107701 MB A01 motherboard
Thank you
-
Hi Guys,
I need a motherboard schematic for file for a AORUS 15P XC please. The EXACT motherboard is ga-rx5lxc rev2.0. It currently has a black screen issue and doesn't display to external display but boots into windows and can also display externally when running ubuntu. If anyone has a motherboard schematic file and boardview for this laptop it would be greatly appreciated. Thanks in advance!05-01-2025, 01:45 PM -
Hello fellows,
I am putting a feeler out for a schematic (or ideally boardview) for the Biostar B660-T Silver motherboard.
I had let my guard down and decided to trust the Biostar supplied Windows based BIOS flash tool, only to find that the system would not POST upon restart.
no problem I thought - I would just flash using my trusty CH341 and be on my merry way.
Upon inspecting the board and locating its Winbond NOR, I found it in a rather precarious spot nestled between the RAM slots and PCIe slot and right next to a rather meltable-looking...12-13-2024, 09:37 PM -
Hello I think I broke my motherboard when trying to upgrade the Ram!
I made some shortcut when pluggining the battery connector because the thiny metal goes over nearest components and made sparks.
The laptop won't poweron anymore so I need to check the motherboard to reveal if there is any shortcut.
Could be great if some of You can share boardview for my motherboard FX516PC r6.0
Thanks.
Giuliano.... -
Please,
Need boardview and schematic P15v Gen 2 (type 21A9, 21AA)
available on others sites
"Lenovo P series laptops (ThinkPad) P15v Gen 2 (type 21A9, 21AA) Laptops (ThinkPad) (T1200 or A2000 GPU only), Motherboard BoardView files and Schematic diagram"
Thanks
-
MSI MEG Godlike x570 motherboard - need schematic and boardview. I have accidentally plugged in the wrong usb plug into a usb3.0 connector on front panel of PC resulting in temporarily shorting out the port. (I know it was really stupid, It was dark in my room and was rushing). I shutdown the computer and now after an immediate restart I get an overcurrent error on boot up saying my PC will shut down in 15 seconds. If I let the computer sit for about 35 minutes, I then can boot the PC without getting error. What I am hoping to find out is what parts were affected by my stupidity. Anyone have any...