Schematics for the EPK50 LA-G07EP REV: 2.0 (HP)

[NiroPall]

Hello friends,
Please share this schematic if you have,
EPK50 LA-G07EP REV: 2.0 (HP)

Thank you.

[AL._.EX]

Only rev:1.0 https://www.badcaps.net/forum/troubl...78067-la-g07ep

[NiroPall]

Only rev:1.0 https://www.badcaps.net/forum/troubl...78067-la-g07ep

Thank you.

[NiroPall]

I noticed display going black and fan spins normally when power switch on., no voltage on PLG1 inductor, other voltages seems ok. when ram is removed and after power on caps lock light blinks
3 long and 2 shorts. CPU(i3 8 Gen) power rail impedance was 1.4 ohms.
Anyone have an idea about this fault? Please help,

Thank you.

[AL._.EX]

I noticed display going black and fan spins normally when power switch on., no voltage on PLG1 inductor, other voltages seems ok. when ram is removed and after power on caps lock light blinks
3 long and 2 shorts. CPU(i3 8 Gen) power rail impedance was 1.4 ohms.
Anyone have an idea about this fault? Please help,

Thank you.

RAM fault.

[NiroPall]

RAM fault.

Check with other two rams, then, caps lock lite stop blinking. but no display. display goes dark.

[AL._.EX]

You need to create a topic about repairing your laptop in the appropriate section.

[NiroPall]

Only rev:1.0 https://www.badcaps.net/forum/troubl...78067-la-g07ep

Thank you.