Schematics for the EPK50 LA-G07EP REV: 2.0 (HP)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • NiroPall
    Senior Member
    • Dec 2018
    • 119
    • Sri Lanka

    #1

    Schematics for the EPK50 LA-G07EP REV: 2.0 (HP)

    Hello friends,
    Please share this schematic if you have,
    EPK50 LA-G07EP REV: 2.0 (HP)

    Thank you.
  • AL._.EX
    Badcaps Veteran
    • Dec 2022
    • 834
    • Belarus

    #2
    Only rev:1.0 https://www.badcaps.net/forum/troubl...78067-la-g07ep

    Comment

    • NiroPall
      Senior Member
      • Dec 2018
      • 119
      • Sri Lanka

      #3
      Originally posted by AL._.EX
      Thank you.

      Comment

      • NiroPall
        Senior Member
        • Dec 2018
        • 119
        • Sri Lanka

        #4
        I noticed display going black and fan spins normally when power switch on., no voltage on PLG1 inductor, other voltages seems ok. when ram is removed and after power on caps lock light blinks
        3 long and 2 shorts. CPU(i3 8 Gen) power rail impedance was 1.4 ohms.
        Anyone have an idea about this fault? Please help,

        Thank you.

        Comment

        • AL._.EX
          Badcaps Veteran
          • Dec 2022
          • 834
          • Belarus

          #5
          Originally posted by NiroPall
          I noticed display going black and fan spins normally when power switch on., no voltage on PLG1 inductor, other voltages seems ok. when ram is removed and after power on caps lock light blinks
          3 long and 2 shorts. CPU(i3 8 Gen) power rail impedance was 1.4 ohms.
          Anyone have an idea about this fault? Please help,

          Thank you.
          RAM fault.

          Comment

          • NiroPall
            Senior Member
            • Dec 2018
            • 119
            • Sri Lanka

            #6
            Originally posted by AL._.EX

            RAM fault.
            Check with other two rams, then, caps lock lite stop blinking. but no display. display goes dark.

            Comment

            • AL._.EX
              Badcaps Veteran
              • Dec 2022
              • 834
              • Belarus

              #7
              You need to create a topic about repairing your laptop in the appropriate section.

              Comment

              • NiroPall
                Senior Member
                • Dec 2018
                • 119
                • Sri Lanka

                #8
                Originally posted by AL._.EX
                Thank you.

                Comment

                Related Topics

                Collapse

                Working...