Hi,
I need the schematic for an MS-17E71 VER: 1.0 motherboard (in an MSI GP75 Leopard).
Thanks in advance!
Dave.
I need the schematic for an MS-17E71 VER: 1.0 motherboard (in an MSI GP75 Leopard).
Thanks in advance!
Dave.
-
-
Re: MS-17E71 VER: 1.0 schematic needed
Omly boardview -
Re: MS-17E71 VER: 1.0 schematic needed
Thank you so much for posting the file!
... I've trying to shoe-horn Open Board View onto my laptop running Kali and have decided (after trying to install dependencies for the last two hours) that it will be easier to just install Ubuntu on the laptop first... it's been a while since I have played in a Linux sandbox...
Wish me luck and I will update my experience with the attached file when I am able to
Comment
-
Here you have the full schematic:
Comment
-
Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.
I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.
Thanks.07-15-2025, 11:15 AM -
Schematic needed (and boardview if available).
Thanks. -
dag3bembcd0 rev d Board view and Schematic needed for Non Graphic Conversion (DIS to UMA) as the Graphic chip is bad -
Dynabook Satellite Pro L40-G-102 Schematic Needed. -
Hello all,
Does anybody have a schematic and/or boardview of the Gigabyte GA-H110-D3A mainboard available? It would really help me out big time...
This board was donated to me in a known non-working state. In its previous life it was used as a mining board, so I suspected bad caps and a relatively easy fix. My intention is to use the fixed board as a testbed for a Truenas or Unraid build. The previous owner told me that the mainboard started to act 'weirdly' after replacing the originally installed Celeron for an i5-6400, varying from starting up irregularly to not at...
Comment